钻孔口旋转水射流吸除尘试验研究

金属矿山 ›› 2012, Vol. 41 ›› Issue (01): 156-157+165.

钻孔口旋转水射流吸除尘试验研究

马中飞^1,2，王付勤¹，曹化朋¹

1.江苏大学环境学院；2.中国矿业大学煤炭资源与安全开采国家重点实验室

出版日期:2012-01-11 发布日期:2012-01-11
基金资助:
* 中国矿业大学煤炭资源与安全开采国家重点实验室开放研究基金项目(编号：10KF04)。

The Dust Suction and Removal Test Research on Swirling Water Jet

Ma Zhongfei^1,2，Wang Fuqin²，Cao Huapeng¹

1.Environment School，Jiangsu University；2.State Key Laboratory of Coal Resources and Safe Mining，China University of Mining and Technology

Online:2012-01-11 Published:2012-01-11

摘要/Abstract

摘要： 为解决钻孔产生粉尘的治理问题，提出了钻孔口旋转水射流吸除尘技术，分析了旋转水射流吸除尘原理，进行了钻孔口旋转水射流吸除尘试验。结果表明，钻孔口采用旋转水射流吸尘除尘技术降尘效果明显，且系统简单、使用方便。

关键词: 旋转水射流, 钻孔口, 吸尘除尘

Abstract: In order to solve the problem of control dust by drilling，the swirling water jet technology for dust suction and removal on drilling hole was put forward，the principle of swirling water jet for dust suction and removal was analyzed，the dust suction and removal test on drilling hole was carried out.The results showed that the swirling water jet technology for dust suction and removal adopted in drilling hole has acquired obvious effect in dust suppression，and with simple system，convenient operation.

Key words: Swirling water jet, Drilling hole, Dust suction and removal

马中飞, 王付勤, 曹化朋. 钻孔口旋转水射流吸除尘试验研究[J]. 金属矿山, 2012, 41(01): 156-157+165.

MA Zhong-Fei, WANG Fu-Qin, CAO Hua-Peng. The Dust Suction and Removal Test Research on Swirling Water Jet[J]. Metal Mine, 2012, 41(01): 156-157+165.