欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2009, Vol. 39 ›› Issue (01): 106-107+176.

• 机电与自动化 • 上一篇    下一篇

基于ANSYS的矿山三维动态建模系统研究与开发

卢宏建1,罗涛1,2,甘德清3   

  1. 1北京科技大学;2.辽宁工程技术大学;3.河北理工大学
  • 出版日期:2009-01-15 发布日期:2012-02-03
  • 基金资助:

    * 教育部重点基金项目(编号:105016)。

Research & Development of Mine 3D Dynamic Modeling System Based on ANSYS

Lu Hongjian1,Luo Tao1,2,Gan Deqing3   

  1. 1.University of Science and Technology Beijing;2.Liaoning Technical University;3 Hebei Polytechnic University
  • Online:2009-01-15 Published:2012-02-03

摘要: 针对ANSYS三维数值建模的复杂性,基于三次样条插值法和趋势面分析原理,采用Borland Delphi 6.0开发了三维动态建模系统。实现了与ANSYS的无缝集成和三维动态建模,具有操作性好、建模精确等优点,大大减少了三维建模工作量,提高了建模效率,便于多方案的模拟计算。

关键词: 三维数值模拟, 动态建模, 开发

Abstract: As ANSYS 3D numerical modeling is complex, the authors developed a 3D dynamic modeling system by using Borland Delphi 6.0 and based on cubic spline interpolation and the principle of trend surface analysis, realizing the seamless integration with ANSYS and 3D dynamic modeling.It has the advantages of good operability and accurate modeling, and can greatly reduce the workload of 3D modeling, improve the modeling efficiency and facilitate the simulation computation of multiple plans.

Key words: 3D numerical simulation, Dynamic modeling