欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2013, Vol. 42 ›› Issue (02): 10-13.

• 采矿工程 • 上一篇    下一篇

基于FLAC3D的矿柱回收顺序数值模拟分析

张飞1,王滨1,巩志忠1,崔志平1,刘文刚2,冀杰2   

  1. 1.内蒙古科技大学矿业工程学院;2.内蒙古石宝铁矿
  • 出版日期:2013-02-15 发布日期:2013-03-13

FLAC3D-based Numerical Simulation Analysis on the Sequence of Pillar Recovery

Zhang Fei1,Wang Bin1,Gong Zhizhong1,Cui Zhiping1,Liu Wengang2,Ji Jie2   

  1. 1.Mining Engineering College, Inner Mongolia University of Science and Technology;2. Inner Mongolia Shibao Iron Mine
  • Online:2013-02-15 Published:2013-03-13

摘要: 矿柱回收顺序的选取对采空区处理过程中围岩的稳定性、安全性具有重大意义,矿柱回收顺序成为采空区处理课题研究的首要问题。采用FLAC3D,对东升庙铅锌矿2#采空区矿柱从一端到另一端顺序回采、从两端到中央推进回采、间隔跳采、从中央到两端推进这4种矿柱回收方法进行数值模拟,通过对比分析研究表明,比较合理的矿柱回收顺序为从中央向两端推进,可为安全生产提供保障。

关键词: 采空区处理, 矿柱回收顺序, 数值模拟, 稳定性分析

Abstract: How to arrange the sequence of pillar recovery is of great significance to keep the stability and safety of surrounding rocks in mined-out processing. The sequence becomes the key issue to study the goaf treatment. FLAC3D numerical simulation is adopted to simulate four kinds of pillars' recovery at No.2 goaf in Dongshenmiao lead-zinc deposit, that is, from one end to the other, from two ends to the middle, interval mining, and from the middle to both ends. Through contrasting and analyzing, a more rational recovery sequence of from the middle to both ends is obtained, which can guarantee the production safety.

Key words: Goaf processing, Sequence of pillar recovery, Numerical simulation, Stability analysis