欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2013, Vol. 42 ›› Issue (08): 74-76+83.

• 地质与测量 • 上一篇    下一篇

高密度电法-氡气测量在矿区隐伏断层勘查中的应用

张赓1,庹先国2,3,汪楷洋1,李彬1   

  1. 1.地球探测与信息技术教育部重点实验室;2.地质灾害防治与地质环境保护国家重点实验室;3.西南科技大学国防科技学院
  • 出版日期:2013-08-15 发布日期:2013-09-27
  • 基金资助:

    * 国家自然科学基金项目(编号:41227802),地质灾害防治国家重点实验室项目(编号:SKLGP2010Z002)。

Application of High Density Resistivity Method and Radon Survey in the Diggings of Blind Fault Survey

Zhang Geng1,Tuo Xianguo2,3,Wang Kaiyang1,Li Bin1   

  1. 1.Key laboratory of Earth Exploration & Information Techniques of the Ministry of Education;2.State Key laboratory of Geo-hazard Prevention and Geo-environment Protection;3.School of National Defense Science and Technology,Southwest University of Science and Technology
  • Online:2013-08-15 Published:2013-09-27

摘要: 利用高密度电法联合氡气测量对攀枝花白马铁矿Ⅰ#排土场及废石胶带输送工程拟建场址区内的隐伏断层进行探测,通过连接多条测线的异常来确定断层的走向及破碎带范围,综合利用两种物探方法的异常特征来推测断层的倾向和倾角。通过钻孔验证表明,高密度电法联合氡气测量的综合物探方法能对隐伏断层进行有效探测,同时这种组合方式也体现出了综合物探的技术优势。

关键词: 高密度电法, 氡气测量, 隐伏断层, 断层产状

Abstract: The high density resistivity method combined with radon survey is used to detect blind fault in the area of the proposed site in the project of No.1 refuse dump and barren rock transportation in Panzhihua Baima Iron Mine.The fault strike and the range of fracture zone is acquired by connecting anomaly belt on multiple lines,and predict the proneness and dip of fault by comprehensively analyzing the anomalous characters of two kinds of geophysical prospecting methods.Through the drilling test,there is an obvious fact that the comprehensive geophysical method with high density resistivity method and radon survey can detect blind fault effectively,and this combination mode also reflects the technical advantage of multi-geophysical prospecting.

Key words: High density resistivity method, Radon survey, Blind fault, Fault parameter