俄罗斯某铜铅锌多金属矿超细磨工艺应用实践

金属矿山 ›› 2020, Vol. 49 ›› Issue (07): 89-93.

俄罗斯某铜铅锌多金属矿超细磨工艺应用实践

俄罗斯克孜尔—喀什特克铜铅锌多金属硫化矿金属矿物嵌布粒度微细，采用原单一球磨机对铜铅混合粗精矿进行再磨，难以满足对矿物解离度的要求。因此，在矿石性质分析和实验室小试的基础上，对再磨系统进行了现场工艺优化与生产实践。将球磨机与超细磨机串联使用，即新增超细磨机对原流程中球磨机产品经旋流器分级后的溢流进行开路再磨再选，满足了最终产品P80粒径小于10 μm的工艺要求，提高了矿石中金属矿物的单体解离度，从而更易分选。新再磨流程平稳运行后，对稳定产品质量作用明显。对比改造前，铅回收率提高16.84%，锌回收率提高4.96%，铜回收率提高2.70%。按全年处理100万t矿量计算，新增锌金属量4 960 t/a，新增铅金属量2 910 t/a，新增铜金属量208 t/a。按当前产品价格计算，每年可为企业多创造利润12 000万元，经济效益显著。

1. 紫金矿业集团股份有限公司，福建上杭 364200；2. 北京科技大学土木与资源工程学院，北京 100083

出版日期:2020-07-15 发布日期:2020-08-21

Ultra-fine Regrinding Process Application in a Copper-lead-zinc Polymetallic Mine in Russia

Kizil-Kashiturk copper-lead-zinc polymetallic sulphide ore in Russia disseminated in micro-fine size and the process with the original single ball mill for regrinding the copper-lead bulk roughing concentrate is difficult to meet the requirement of high mineral liberation. Therefore， the regrinding system transform and production practice was carried out based on mineralogy properties analysis and laboratory scale. By series connection of ball mill and ultra-fine mill， that is adding a new ultra-fine mill to regrind the overflow of the hydrocyclone matched with the original ball mill， final regrinding products of P80 size less than 10 μm was obtained， indicated that the liberation of metal minerals in ores is greatly improved， which makes it conducive to sorting. After stable running of the new regrinding process， it has obvious effect on product quality stabilizing. Compared with the previous system， the transfomation brought out the increase of recovery rate with Pb 16.84%， Zn 4.96% and Cu 2.70%. According to the annual processing of one million tons of ore， the increase of metal amounts with Zn 4 960 t/a， Pb 2 910 t/a，and Cu 208 t/a was realized， which could create a newly added profit of 120 million yuan for enterprises based on the calculation product price.

1. Zijin Mining Group Co.， Ltd.， Shanghang 364200， China； 2. School of Civil and Resources Engineering， University of Science and Technology Beijing， Beijing 100083， China

Online:2020-07-15 Published:2020-08-21

摘要/Abstract

摘要： 俄罗斯克孜尔—喀什特克铜铅锌多金属硫化矿金属矿物嵌布粒度微细，采用原单一球磨机对铜铅混合粗精矿进行再磨，难以满足对矿物解离度的要求。因此，在矿石性质分析和实验室小试的基础上，对再磨系统进行了现场工艺优化与生产实践。将球磨机与超细磨机串联使用，即新增超细磨机对原流程中球磨机产品经旋流器分级后的溢流进行开路再磨再选，满足了最终产品P80粒径小于10 μm的工艺要求，提高了矿石中金属矿物的单体解离度，从而更易分选。新再磨流程平稳运行后，对稳定产品质量作用明显。对比改造前，铅回收率提高16.84%，锌回收率提高4.96%，铜回收率提高2.70%。按全年处理100万t矿量计算，新增锌金属量4 960 t/a，新增铅金属量2 910 t/a，新增铜金属量208 t/a。按当前产品价格计算，每年可为企业多创造利润12 000万元，经济效益显著。

关键词: 铜铅锌多金属硫化矿, 铜铅混浮粗精矿, 超细磨, 再磨流程改造

Abstract: Kizil-Kashiturk copper-lead-zinc polymetallic sulphide ore in Russia disseminated in micro-fine size and the process with the original single ball mill for regrinding the copper-lead bulk roughing concentrate is difficult to meet the requirement of high mineral liberation. Therefore， the regrinding system transform and production practice was carried out based on mineralogy properties analysis and laboratory scale. By series connection of ball mill and ultra-fine mill， that is adding a new ultra-fine mill to regrind the overflow of the hydrocyclone matched with the original ball mill， final regrinding products of P80 size less than 10 μm was obtained， indicated that the liberation of metal minerals in ores is greatly improved， which makes it conducive to sorting. After stable running of the new regrinding process， it has obvious effect on product quality stabilizing. Compared with the previous system， the transfomation brought out the increase of recovery rate with Pb 16.84%， Zn 4.96% and Cu 2.70%. According to the annual processing of one million tons of ore， the increase of metal amounts with Zn 4 960 t/a， Pb 2 910 t/a，and Cu 208 t/a was realized， which could create a newly added profit of 120 million yuan for enterprises based on the calculation product price.

Key words: Copper-lead-zinc polymetallic sulphide ore, Copper and lead bulk roughing concentrate, Ultra-fine mill, Regrinding process transformation

鲁军. 俄罗斯某铜铅锌多金属矿超细磨工艺应用实践[J]. 金属矿山, 2020, 49(07): 89-93.

Lu Jun. Ultra-fine Regrinding Process Application in a Copper-lead-zinc Polymetallic Mine in Russia[J]. Metal Mine, 2020, 49(07): 89-93.

[1]	郭文达, 韩跃新, 朱一民, 李艳军, 范志国. 岩浆岩型含钛铁精矿降钛研究[J]. 金属矿山, 2019, 48(02): 71-75.
[2]	周艳飞. 内蒙古某铜铅锌多金属硫化矿石选矿试验[J]. 金属矿山, 2016, 45(08): 85-88.
[3]	王伟之, 陈丽平, 孟庆磊. 某复杂难选铜铅锌多金属硫化矿选矿试验[J]. 金属矿山, 2014, 43(03): 75-79.
[4]	李国栋, 柏亚林, 包玺琳, 袁艳. 甘肃某复杂铜铅锌硫化矿石浮选新工艺研究[J]. 金属矿山, 2012, 41(08): 65-69+72.
[5]	罗仙平, 王笑蕾, 罗礼英, 陈晓明, 吕玲芝. 七宝山铜铅锌多金属硫化矿浮选新工艺研究[J]. 金属矿山, 2012, 41(04): 68-73.
[6]	张生武, 刘明实. 西藏某铜铅锌多金属硫化矿石选矿试验[J]. 金属矿山, 2011, 40(2): 72-75+84.
[7]	李文辉, 高伟, 牛埃生, 刘斌, 陈迪清. 新疆某铜铅锌多金属硫化矿选矿工艺研究[J]. 金属矿山, 2010, 39(12): 58-62.
[8]	李荣改, 宋翔宇, 张雨田, 余广学, 李志伟. 青海某复杂铜铅锌多金属矿石选矿工艺研究[J]. 金属矿山, 2010, 39(12): 67-71.
[9]	包永明. 用梅山硫酸渣生产氧化铁红的试验研究[J]. 金属矿山, 2009, 39(08): 158-162.
[10]	罗仙平, 付中元, 陈华强, 严群, 邱廷省, 何丽萍. 会理铜铅锌多金属硫化矿浮选新工艺研究[J]. 金属矿山, 2008, 38(08): 45-51.