欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2026, Vol. 55 ›› Issue (10): 1-15.

• 《金属矿山》创刊60周年成果专栏 •    下一篇

露天矿山边坡工程设计关键影响要素研究进展与展望

韩龙强1,2,3 ,吴顺川1,2,3 ,王广和4 ,马海涛5 ,聂 闻6   

  1. 1.昆明理工大学国土资源工程学院,云南 昆明 650093; 2.云南省高原山地地质灾害预报预警与生态保护修复重点实验室,云南 昆明 650000; 3.自然资源部高原山地地质灾害预报预警与生态保护修复重点实验室,云南 昆明 650000; 4.中勘冶金勘察设计研究院有限责任公司,河北 保定 071051; 5.中国安全生产科学研究院,北京 100012;6.中钢集团马鞍山矿山研究总院股份有限公司,安徽 马鞍山 243000
  • 出版日期:2026-11-03 发布日期:2026-11-03
  • 通讯作者: 吴顺川(1969—),男,教授,博士,博士研究生导师。
  • 作者简介:韩龙强(1989—),男,教授,博士(后),硕士研究生导师。
  • 基金资助:
    云南省教育厅高校服务重点产业科技项目(编号:FWCY-QYCT2024009);云南省“兴滇英才支持计划”青年人才项目(编号: KKXX202521023);国家自然科学基金项目(编号:42302313)。

Research Progress and Prospects on Key Influencing Factors in Open-pit Mine Slope Engineering Design

HAN Longqiang1,2,3 ,WU Shunchuan1,2,3 ,WANG Guanghe4 ,MA Haitao5 ,NIE Wen6   

  1. 1.Faculty of Land Resources Engineering,Kunming University of Science and Technology,Kunming 650093,China; 2.Yunnan Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area,Kunming 650000,China; 3.Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area,MNR,Kunming 650000,China; 4.Zhongkan Metallurgical Investigation Design & Research Institute Co.,Ltd.,Baoding 071051,China; 5.China Academy of Safety Science and Technology,Beijing 100012,China; 6.Sinosteel Maanshan General Institute of Mining Research Co.,Ltd.,Maanshan 243000,China
  • Online:2026-11-03 Published:2026-11-03

摘要: 露天矿山边坡工程设计是一个涉及地质勘察、力学分析、安全评价与经济效益权衡的系统工程,其设计 的合理性直接关系到矿山资源的安全高效回收与长期运营效益。系统梳理了露天矿山边坡工程设计中的三大关键 影响要素:工程岩体参数的准确获取、稳定性分析方法的科学选用与评价标准的合理构建。其中,岩体参数是设计的 基础输入,决定了分析的起点与可信度;分析方法是连接参数与评价的桥梁,决定了稳定性评判的科学性与精度;评 价标准则是设计目标与安全储备的最终体现。三者相互支撑、互为前提,形成一个有机整体,缺一不可。基于这一体 系,综述了近年来在上述3个方面取得的研究进展与实践经验,以期为推动矿山边坡设计从经验走向科学、从单一走 向系统提供理论支撑。围绕工程岩体参数确定方法,系统阐述了地质模型、结构模型、岩体模型与水文地质模型协同 构建的技术路径,重点介绍了等效岩体技术在刻画岩体尺度效应、各向异性与结构面控制行为方面的应用原理与实 现方法,展示了其在岩体表征单元体确定、强度参数选取及破坏机制模拟中的独特优势。在稳定性分析方法层面,综 述了改进极限平衡条分法、双安全系数分析法、数值模拟滑面搜索技术及可靠性分析方法的研究进展。重点剖析了 各类方法在考虑条间力实际分布、安全系数合理求解、滑面精准识别及参数不确定性量化等方面的理论突破与工程 适配性,强调多方法融合是应对复杂条件下边坡稳定性评判的必然路径。针对评价标准体系,指出现行以单一安全 系数为核心的规范在实际应用中存在的尺度忽视、取值模糊、风险割裂等问题,提出应基于边坡尺度(总体边坡、路间 边坡、台阶边坡)与服务年限建立差异化设计安全系数,并推动安全系数与失稳概率相结合的双重评价体系建设,实 现安全储备与风险控制的协同表达。在上述分析的基础上,展望了露天矿山边坡工程设计的发展方向,认为当前及 未来一段时期的核心痛点在于:岩体参数的多源异构数据融合与动态更新机制尚不完善,多尺度结构面控制下的破 坏模式识别仍缺乏普适性方法,评价标准与风险接受水平之间的工程映射关系尚未建立。面向“十五五”乃至更长时 期,该领域的研究应聚焦于:构建以数据智能体为核心的地质—力学—监测一体化建模方法,发展基于机器学习与物 理机制融合的边坡动态响应预测模型,推动以风险为导向、以可靠度为支撑的多目标协同设计标准的建立,最终实现 露天矿山边坡工程由“静态设计、经验决策”向“智能设计、风险决策”的根本转变。

关键词: 露天矿山 , 边坡工程设计 , 岩体参数 , 稳定性分析 , 安全系数 , 失稳概率 , 评价标准

Abstract: The design of open-pit mine slope engineering constitutes a systematic endeavor integrating geological investigation,mechanical analysis,safety assessment,and economic optimization. Its rationality directly determines the safe and effi cient recovery of mineral resources and the long-term operational benefits of mining enterprises.This paper systematically re views the key influencing factors in open-pit mine slope engineering design,explicitly identifying three core elements:accurate acquisition of engineering rock mass parameters,scientific selection of stability analysis methods,and rational construction of e valuation criteria.Within this system,rock mass parameters serve as the foundational input,determining the starting point and credibility of the analysis;analysis methods act as the bridge connecting parameters and evaluation,governing the scientific rig or and precision of stability judgments;evaluation criteria ultimately embody the design objectives and safety reserves.These three elements support and presuppose one another,constituting an organic whole where each is indispensable.Based on this conceptual framework,this paper synthesizes research progress and practical experiences across these three dimensions in re cent years,aiming to provide theoretical support for advancing slope design from empirical practice towards scientific methodol ogy and from unitary approaches towards systematic integration.Regarding methodologies for determining engineering rock mass parameters,this paper systematically elaborates the technical pathways for collaborative construction of geological models,struc tural models,rock mass models,and hydrogeological models.It focuses on introducing the application principles and implemen tation methods of equivalent rock mass technology in characterizing scale effects,anisotropy,and discontinuity-controlled behav ior of rock masses,demonstrating its unique advantages in determining the representative elementary volume,selecting strength parameters,and simulating failure mechanisms of rock masses. In terms of stability analysis methods,this paper reviews re search progress in improved limit equilibrium slice methods,dual safety factor analysis methods,numerical simulation-based slip surface search techniques,and reliability analysis methods.It systematically analyzes the theoretical breakthroughs and en gineering adaptability of various methods in considering actual inter-slice force distributions,rational solution of safety factors, precise slip surface identification,and parameter uncertainty quantification,emphasizing that multi-method integration repre sents an inevitable pathway for addressing stability assessments under complex conditions.Concerning evaluation criteria sys tems,this paper identifies limitations in current specifications centered on single safety factors,including scale neglect,ambigu ous value selection,and risk fragmentation in practical applications.It proposes establishing differentiated design safety factors based on slope scales (overall slopes,inter-ramp slopes,and bench slopes) and service life,while promoting the construction of a dual evaluation system combining safety factors with instability probabilities to achieve coordinated expression of safety re serves and risk control.Based on the aforementioned analysis,this paper envisions future development directions for open-pit mine slope engineering design,identifying core challenges in the current and forthcoming periods:imperfect mechanisms for multi-source heterogeneous data fusion and dynamic updating of rock mass parameters,lack of universal methods for failure mode identification under multi-scale discontinuity control,and unestablished engineering mapping relationships between evalu ation criteria and risk acceptance levels.Looking towards the 15th Five-Year Plan period and beyond,research in this field should focus on:constructing integrated geological-mechanical-monitoring modeling methods centered on data intelligence a gents;developing slope dynamic response prediction models based on machine learning and physical mechanism fusion;and promoting the establishment of risk-oriented,reliability-supported multi-objective collaborative design standards.Ultimately,this will facilitate the fundamental transformation of open-pit mine slope engineering from "static design and experience-based deci sion-making" toward "intelligent design and risk-based decision-making".

中图分类号: