金属矿山 ›› 2008, Vol. 38 ›› Issue (09): 149-151.
• 安全与环保 • 上一篇 下一篇
许秦坤
收稿日期:
出版日期:
发布日期:
Xu Qinkun
Received:
Online:
Published:
摘要: 目前对一般尘源控制研究较少,系统的粉尘扬尘(尘化)机理的研究更少,为此,作为首要问题提出弄清尘化机理,从源头上控制治理粉尘。对粉尘颗粒所受作用力进行分析,特别就超细粉尘的扬尘机理提出相应的物理模型。初步研究表明,1~10 μm的粉尘关键是受机械力、升力和粘滞动力的影响;几微米的粉尘颗粒从静止到与主流速度一致,在瞬间即可完成;微细粉尘扬尘过程是极其复杂多变的。
关键词: 扬尘机理, 尘源控制, 大气颗粒物(PM), 监测指标, 空气附面层, 压差, 物理模型
Abstract: In light that little study has been made on the control of common dusting source and even less systematic study on dusting mechanism, it is put forward that it is of primary importance to make clear the dusting mechanism so as to control the dust from its source. Analysis was made of the force acted on the dust particulates and the preliminary study on the physical model of the dusting mechanism of super-fine particulates was also conducted. The results indicate that the dusting of 1~ 10 μm particulates is effected by mechanical force, rising force and ixodynamics; several micron-fine dust particulates can be made from stillness to getting the velocity identical to that of the mainstream in only a momentary time. The dusting of particulates is extremely complex and varied.
Key words: Dusting mechanism, dust source control, Atmospheric particulate matter (pm), Monitoring index, Air boundary layer, Pressure difference, Physical mode
许秦坤. 超细粉尘的扬尘机理研究[J]. 金属矿山, 2008, 38(09): 149-151.
XU Qin-Kun. Study on the Dusting Mechanism of Super-fine Particulate[J]. Metal Mine, 2008, 38(09): 149-151.
/ 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.jsks.net.cn/CN/
http://www.jsks.net.cn/CN/Y2008/V38/I09/149