欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2007, Vol. 37 ›› Issue (08): 65-67.

• 机电与自动化 • 上一篇    下一篇

钻孔电视在深孔爆破成井中的应用

柳小胜1,刘优平2,欧任泽1   

  1. 1.长沙矿山研究院;2.南昌工程学院
  • 出版日期:2007-08-15 发布日期:2012-03-05

Application of Borehole TV in Shaft Formation by Long-Hole Blasting

Liu Xiaosheng1,Liu Youping2,Ou Renze1   

  1. 1.Changsha Institute of Mining Research;2. Nanchang Institute of Technology
  • Online:2007-08-15 Published:2012-03-05

摘要: 某矿利用深孔爆破成井技术形成高溜井,因岩体局部节理裂隙发育,严重影响爆破效果和效率。提出了利用钻孔电视从前视角度和侧视角度对钻孔内孔壁进行无扰动的原位钻孔摄像,分析岩层结构、节理裂隙,绘制岩层剖面图,根据结构面的产状调整装药结构和爆破方案,避免了爆破事故,快速顺利穿越结构面。实践证明,在钻孔电视的协助下进行深孔爆破成井,可视化程度高、成本低、安全高效。

关键词: 钻孔电视, 深孔爆破成井, 高溜井, 结构面

Abstract: A mine used the technology of shaft formation by long hole blasting to construct a long raise. As the developed joint and fissures in local rockmass would seriously affect the blasting effect and efficiency, it was proposed to use borehole TV to take the un-impacted in-situ photograph of the internal wall of the borehole from the front and side angles for analyzing the stratum structure, joint and fissure and mapping the sectional drawing of the strata , which can make it possible to regulate the explosive charging structure and the blasting scheme according to the occurrence state of the structural plane so as to avoid the blasting accident and rapidly pass through the structural plane. The practice has shown that borehole TV-assisted shaft formation by long-hole blasting has the advantages of high visualization, low cost, safety and high efficiency.

Key words: Borehole TV, Shaft formation by long-hole blasting, Long raise, Structural plane