欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2007, Vol. 37 ›› Issue (11): 38-41.

• 采矿工程 • 上一篇    下一篇

HP复合型尾矿胶结剂的研究

崔学奇,葛会超,吕宪俊   

  1. 山东科技大学
  • 出版日期:2007-11-15 发布日期:2012-02-09

Research on HP Compound Tailing Cementing Agent

Cui Xueqi,Ge Huichao,Lyu Xianjun   

  1. Shandong University of Science and Technology
  • Online:2007-11-15 Published:2012-02-09

摘要: 采用HWM和PC 2种胶凝材料配合使用的方法,研究了一种HP复合型尾矿胶结剂。对不同浓度、不同种类、不同粒度的尾矿进行胶结试验,测得灰砂比为12%的胶结模块的3 d、7 d、28 d、56 d的单轴抗压强度。通过对胶结模块的强度和胶结剂材料成本的综合分析来确定新型复合型胶结剂的最佳配比和使用方法。试验表明,料浆含水量对胶结剂的配比无影响;骨料种类对胶结剂的配比的影响实际上为骨料粒度对胶结剂的配比的影响。

关键词: 胶凝材料, 尾矿胶结, 复合胶结剂, 新型胶结剂

Abstract: This paper investigates a HP compound tailing cementing agent composed of high water material (HWM) and portable cement (PC). Cementation test was made on the tailings at different concentrations, types and particle sizes, and measurement was made on the uniaxial compressive strength of 3d, 7d, 28d and 56d of the cemented blocks with a cement-sand ratio of 12%. The optimal proportioning ratio and application method of this new type compound cementing agent are determined through the comprehensive analysis of the cemented block strength and the cost of the cementing material. The test results show that the tailing pulp concentration has no impact on the proportioning ratio of the cementing agent and the effect of the aggregate type on the agent is in fact that of the aggregate particle size.

Key words: Cementing agent, Tailing cementing, Compound cementing agent, New type binder