欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2009, Vol. 39 ›› Issue (10): 12-15+20.

• 专题综述 • 上一篇    下一篇

金属化球团技术现状

康兴东1,刘建朋2,夏春才3,陈志英4,陈铁军5   

  1. 1.中冶东方工程技术有限公司;2.唐山钢铁设计研究院;3.中冶长天国际工程有限公司;4.韶关钢铁集团公司烧结厂;5.武汉科技大学
  • 出版日期:2009-10-15 发布日期:2011-04-26

Status for Metalized Pellets Technology

Kang Xingdong1,Liu Jianpeng2,Xia Chuncai3,Chen Zhiying4,Chen Tiejun5   

  1. 1.Beris Engineering and Research Corporation;2.Tangshan Iron and Steel Design Institute;3.Changtian International Engineering and Research Corporation;4.Sintering in Shaoguan Iron and Steel Group Company;5.Wuhan University of Science and Technology
  • Online:2009-10-15 Published:2011-04-26

摘要: 概述了金属化球团技术的发展;分析了金属化球团的特点;介绍了金属化球团的还原机理以及工业化生产金属化球团的两大基本方法——气基法和煤基法;最后通过对5种金属化球团具体生产工艺的对比,指出目前最适合我国的金属化球团生产工艺是转底炉工艺和回转窑工艺。

关键词: 金属化球团, 技术现状, 生产工艺

Abstract: The paper summarizes the development of metalized pellets technology,analyzes its characteristics,and introduces its mechanism of reduction and the two basic methods in production,that is,the gas-based method and the coal-based method.And then,five processes for producing the metalized pellets are compared,pointing out that the most suitable process in production of metalized pellets in China is the rotary furnace process and the rotary reduction kiln process.

Key words: Metallized pellets, Status of technology, Production process