欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2011, Vol. 40 ›› Issue (10): 91-95.

• 矿物工程 • 上一篇    下一篇

贾家堡子铁矿8号矿体矿石选矿工艺研究

刘丽梅1,张永2   

  1. 1.本溪市平山区环保局;2.中钢集团马鞍山矿山研究院有限公司
  • 出版日期:2011-10-11 发布日期:2011-10-12

Research on the Beneficiation Process of No.8 Ore-body of Jiajiapuzi Iron Ore

Liu Limei1,Zhang Yong2   

  1. 1.Pingshan District Environmental Protection Bureau of Benxi;2.Sinosteel Maanshan Institute of Mining Research Co., Ltd.
  • Online:2011-10-11 Published:2011-10-12

摘要: 为了给大规模合理开发本钢集团贾家堡子铁矿8号矿体矿石资源提供技术依据,针对该矿石磁铁矿嵌布粒度微细的特点,采用大块干式磁选抛废—单一弱磁选和大块干式磁选抛废—弱磁选—反浮选两种工艺流程进行了选矿试验。结果表明:前者在-0.030 8 mm占90%的最终磨矿细度下,可获得铁品位为65.76%、回收率为75.93%的铁精矿;后者在-0.043 mm占90%的最终磨矿细度下,可获得铁品位为65.47%、回收率为74.43%的铁精矿。两流程技术指标相近,采用哪种流程取决于技术经济比较。  

关键词: 贾家堡子铁矿8号矿体, 微细粒嵌布磁铁矿, 大块干式预选, 弱磁选, 反浮选

Abstract: In order to provide technical basis for rationally developing mineral resources at No.8 ore-body of Benxi Iron and Steel Group in large-scale, and in view of the characteristics of micro-fine embedded magnetite, the beneficiation tests were carried by the process of bulk dry magnetic separation for tailings removal-single low intensity magnetic separation and the process of bulk dry magnetic separation-low intensity magnetic separation-reverse flotation. The results showed that iron concentrate with Fe grade of 65.76% and recovery of 75.93% was obtained by the former under the final grinding fineness -0.030 8 mm 90%;Iron concentrate with Fe grade of 65.47%, recovery of 74.43% was obtained by the latter under the grinding fineness of -0.043 mm 90%. Since the technical indexes obtained by the two processes are similar, which one you adopted depends on the technical and economical comparison.

Key words: No.8 ore-body of Jiajiapuzi iron ore, Micro-fine embedded magnetite, Bulk dry concentration, Low intensity magnetic separation, Reverse flotation