欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2011, Vol. 40 ›› Issue (11): 75-77+106.

• 矿物工程 • 上一篇    下一篇

福建某细粒难选磁铁矿选矿试验研究

张晓洲,彭会清,王江巍   

  1. 武汉理工大学资源与环境工程学院
  • 出版日期:2011-11-15 发布日期:2011-11-17

Mineral Separation Test Research on Fine and Refractory Magnetite Ore from Fujian

Zhang Xiaozhou,Peng Huiqing,Wang Jiangwei   

  1. School of Resources and Environmental Engineering,Wuhan University of Technology
  • Online:2011-11-15 Published:2011-11-17

摘要: 福建某微细粒嵌布磁铁矿石采用现场的磨选流程处理,精矿铁品位达不到产品质量要求。现场粗精矿矿物性质分析结果表明,其单体磁铁矿物约占60%,磁性铁占有率为95.13%,适宜采用单一弱磁选工艺处理。在进行了弱磁选场强和中矿再磨细度条件试验后,进行了筛分分级—筛下2段弱磁精选—筛上中矿再磨—磨矿产品2段弱磁精选流程试验,最终可获得铁品位为64.18%、铁回收率为95.41%的铁精矿。试验流程是处理该矿石的简洁而高效的流程。  

关键词: 磁铁矿, 预先细筛, 弱磁选

Abstract: The micro-fine disseminated magnetite ore from Fujian use grind-separation flow in field,iron grade of the concentrates are less than the product quality requirements.The field crude concentrate mineral properties analysis results showed that the monomer material have about 60% in it,magnetic iron share is 95.13%,it's suitable for handling a single low intensity magnetic separation craftwork.Following the condition test of low intensity magnetic separation field strength and middles regrinding the degree of fineness,then has conducted the screening classification-under the screen 2 segment low intensity magnetic concentration on the screen middles regrinding-grinding product 2 segment low intensity magnetic concentration flow test,which finally can obtain iron concentrates of iron grading 64.18%,the iron recovery 95.41%.Test flow is simple and efficient test to handle the ores.

Key words: Magnetite ore, Pre-fine screening, Low intensity magnetic separation