欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2013, Vol. 42 ›› Issue (08): 24-26.

• 采矿工程 • 上一篇    下一篇

基于Flac3D数值模拟的阶段回采顺序研究

杨玉学1,程宏2,杨天宝1   

  1. 1.中钢集团工程设计研究院有限公司;2.河北省矾山磷矿有限公司
  • 出版日期:2013-08-15 发布日期:2013-09-27

Study of Stage Stoping Sequence based on Flac3D Numerical Simulation Software

Yang Yuxue1,Cheng Hong2,Yang Tianbao1   

  1. 1.Sinosteel Engineering Design & Research Institute Co.,Ltd.;2.Heibei Fanshan Phosphoate Mine Co.,Ltd.
  • Online:2013-08-15 Published:2013-09-27

摘要: 通过Flac3D数值模拟软件,以矾山磷矿为载体,就2个阶段不同回采顺序下顶板的应力、位移等特性进行了模拟。采用阶段下向回采时采场和围岩处的应力值要小于阶段上向回采时的应力值,有利于采场的稳定性。采用下向阶段回采的方式时,上阶段的充填体在本阶段回采过程中充当了上覆岩层变形的缓冲体,限制了变形的充分发展,减小了上覆岩层的变形。

关键词: 阶段回采顺序, 顶板沉降, Flac3D, 数值模拟

Abstract: With Fanshan phosphate mine as carrier,simulation on roof stress,displacement and other characteristics under different stoping sequences at two stages are carried out through Flac3D numerical simulation software.The stress value of the stope and surrounding rocks with the stage underhand stoping is less than that with the stage overhand stoping,which is beneficial to the stability of the stope.When adopting the stage underhand mining,the filling body from the upper stage is acted as the buffering body for the deformation of the overburden rocks at this stage,by which the deformation development is fully limited and the deformation of the overburden is reduced.

Key words: Stage stoping sequence, Roof subsidence, Flac3D, Numerical simulation