新疆某铍精矿浸出工艺研究

金属矿山 ›› 2014, Vol. 43 ›› Issue (09): 69-71.

新疆某铍精矿浸出工艺研究

王清良¹，李中¹，李乾¹，胡鄂明¹，熊骁¹，成泉辉²

1.南华大学核资源工程学院，湖南衡阳 421001；2.水口山有色金属公司第六冶炼厂，湖南衡阳 421001

出版日期:2014-09-15 发布日期:2015-04-15
基金资助:
* 湖南省科技厅重点项目（编号：2013GK2023）。

Study on Leaching Process of a Beryllium Concentrate from Xinjiang

Wang Qingliang¹，Li Zhong¹，Li Qian¹，Hu Eming¹，Xiong Xiao¹，Cheng Quanhui²

1.School of Nuclear Resource Engineering，University of South China，Hengyang 421001，China；2.No.6 Smelting Plant of Shuikoushan Nonferrous Metals Company，Hengyang 421001，China

Online:2014-09-15 Published:2015-04-15

摘要/Abstract

摘要： 新疆某铍精矿粒度为0.074～0 mm，铍含量为5.60%。为了高效提取该铍精矿中的铍，对硫酸加热预处理—搅拌浸出工艺中浓硫酸的用量、预处理温度、搅拌浸出过程的液固比和浸出时间进行研究。结果表明：在铍精矿与浓硫酸质量比为1∶1.5、预处理温度为180 ℃、搅拌浸出的液固比为2∶1、浸出时间为4 h的情况下，氧化铍浸出率达到97%，该工艺的浸出效果良好；浓硫酸的用量、预处理温度、搅拌浸出过程的液固比和浸出时间对氧化铍浸出率都有显著的影响，其中以浸出温度的影响最为显著。通过此工艺来浸出铍精矿不仅能大大降低能耗，还能有效节约企业成本，为铍精矿的浸出提供借鉴。

关键词: 铍精矿, 浓硫酸预处理, 搅拌浸出

Abstract: In order to efficiently extract beryllium in a beryllium concentrate，Xinjiang province，with particle size from 0.074 to 0 mm，beryllium content of 5.60%，the dosage of concentrated sulfuric acid，pretreatment temperature，the ratio of liquid to solid，and leaching time in process of heating sulfuric acid pretreatment-agitation leaching are studied.The result show that leaching rate of beryllium oxide reaches 97% with mass ratio of beryllium concentrate to concentrated sulfuric acid of 1〖DK（〗∶〖DK）〗1.5，pretreatment temperature at 180 ℃，liquid to solid ratio of 2〖DK（〗∶〖DK）〗1 in agitation leaching，and leaching for 4 h.This process has good leaching performance.All factors of dosage of concentrated sulfuric acid，pretreatment temperature，liquid to solid ratio，as well as leaching time significantly influence the leaching rate of beryllium oxide，among which the temperature is the most.By the leaching process above，energy consumption and costs can be greatly reduced.The process provides a reference for beryllium concentrate leaching.

Key words: Beryllium concentrate, Concentrated sulfuric acid pretreatment, Agitation leaching

王清良, 李中, 李乾, 胡鄂明, 熊骁, 成泉辉. 新疆某铍精矿浸出工艺研究[J]. 金属矿山, 2014, 43(09): 69-71.

WANG Qing-Liang, LI Zhong, LI Qian, HU E-Ming, XIONG Xiao, CHENG Quan-Hui. Study on Leaching Process of a Beryllium Concentrate from Xinjiang[J]. Metal Mine, 2014, 43(09): 69-71.

[1]	刘亚平, 傅钰辉, 尹　君, 李　阳, 邓　洁, 孙春宝, 寇　珏. 赞比亚卢安夏难浸铜矿石扼酸控杂浸出技术研究[J]. 金属矿山, 2024, 53(8): 100-.
[2]	武彪, 谢昆, 张兴勋, 武名麟, 温建康. 玉龙铜矿氧化矿石合理浸出工艺研究[J]. 金属矿山, 2010, 39(12): 54-57.
[3]	吴爱祥, 王少勇, 王洪江. 尾矿浸出技术现状与存在问题[J]. 金属矿山, 2009, 39(07): 1-4.
[4]	张卫民, 谷士飞, 孙占学. 催化条件下低品位原生硫化铜矿的搅拌细菌浸出[J]. 金属矿山, 2009, 39(04): 40-42+49.
[5]	曹占芳, 钟宏, 刘广义. 墨西哥某铜矿浮选-浸出-萃取-电积回收铜工艺研究[J]. 金属矿山, 2008, 38(05): 63-65.

扫码分享