基于Sirovision的节理岩体调查及稳定性分析

金属矿山 ›› 2015, Vol. 44 ›› Issue (05): 140-144.

基于Sirovision的节理岩体调查及稳定性分析

张驰^1,2，徐帅^1,2，张小辉^1,2，何国强³

1.东北大学资源与土木工程学院，辽宁沈阳 110819；2.深部金属矿山安全开采教育部重点实验室，辽宁沈阳 110819；3.山东黄金矿业（莱州）有限公司，山东烟台 261441

出版日期:2015-05-15 发布日期:2015-08-04
基金资助:
* 国家自然科学基金项目（编号：51204031，51274055），“十二五”国家科技支撑计划项目（编号：2013BAB02B03），教育部基本科研业务费项目（编号：N130401007，N120701001），辽宁省教育厅一般项目（编号：L2014100）。

Jointed Rock Survey and Stability Analysis Based on Sirovision

Zhang Chi^1,2，Xu Shuai^1,2，Zhang Xiaohui^1,2，He Guoqiang³

1.College of Resources and Civil Engineering，Northeastern University，Shenyang 110819，China；2.Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines，Shenyang 110819，China；3.Shandong Gold Ming Industry (Laizhou)Co.，Ltd.，Yantai 261441，China

Online:2015-05-15 Published:2015-08-04

摘要/Abstract

摘要： 针对人工近距离接触测量获取岩体结构面信息工作效率低，劳动强度大等问题，开展了Sirovision岩体结构面三维不接触测量系统的研究。介绍了该系统的硬件组成及后处理软件的具体功能，提出了一套适用于该系统的岩体结构面信息采集方法与数据处理流程，并成功应用于铁蛋山铁矿的节理岩体调查与分析中。首先根据现场采集的调查区内原始格式二维图片，获得了真实坐标定位的巷道三维空间模型数据；然后进行了岩体结构面的数字化识别，并将得到的统计数据依据产状特征进行了分组，获得了不同节理组的空间方位统计信息；最后根据不同节理组间的相互位置关系，进行了基于后处理软件系统的楔形体结构分析，确定了危险块体的位置。上述研究成果可为矿山安全生产及工程参数优化提供参考。

关键词: Sirovision测量系统, 岩体稳定性分析, 岩体结构面参数, 产状特征, 三维空间模型

Abstract: Aiming at the low efficiency and labor-intensive of obtaining the information of rock mass structural surface by artificial close contact measurement，the Sirovision three-dimensional and non-contact measurement system of rock mass structural surface is researched.The hardware composition and specific features of post-processing software of the system are introduced，the suitable method of obtaining rock mass structure surface information and the flow of data processing are proposed and applied to survey and analyze the jointed rock in Tiedanshan iron mine successfully.Firstly，according to the original formation of two-dimensional images obtained in the investigation area，the three-dimensional roadway space model data with real coordinates is got.Then，the rock mass structure surface is digitally identified，the obtained indentified data are grouped on the basis of occurrence so as to obtain the spatial orientation of different joints group.Finally，according to the positional relationship among different joints group，the wedge of the structure is analyzed based on the post-processing software system to determine the location of dangerous structural body.The above research can provide some reference for the mine safety production and optimization of engineering parameters.

Key words: Sirovision measurement system, Stability analysis of rock mass, Parameters of rock mass structural surface, Occurrence characteristics, Three-dimensional space model

张驰, 徐帅, 张小辉, 何国强. 基于Sirovision的节理岩体调查及稳定性分析[J]. 金属矿山, 2015, 44(05): 140-144.

ZHANG Chi, XU Shuai, ZHANG Xiao-Hui, HE Guo-Qiang. Jointed Rock Survey and Stability Analysis Based on Sirovision[J]. Metal Mine, 2015, 44(05): 140-144.

扫码分享