欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2016, Vol. 45 ›› Issue (08): 142-147.

• 安全与环保 • 上一篇    下一篇

毕机沟矿区露天开采的边坡稳定性及最终边坡角研究

王天雄,陈平   

  1. 陕西有色冶金矿业集团有限公司,陕西 西安 710075
  • 出版日期:2016-08-15 发布日期:2016-08-31

Research on Slope Stability and Final Slope Angle of the Open Pit Mining in the Bijigou Mine

Wang Tianxiong,Chen Ping   

  1. Shaanxi Metallurgical & Mining Group Co.,Ltd.,Xi'an 710075,China
  • Online:2016-08-15 Published:2016-08-31

摘要: 毕机沟露天境界最终边坡高度达到510 m,其中山坡和凹陷露天各占一半。8~15线边坡形态复杂。为了确定经济合理的最终边坡角,应用FLAC3D研究了几个典型剖面的边坡稳定性,分别确定了各部分边坡的山坡、凹陷最终边坡角及台阶构成参数,并提出了各部分局部加固的参数。该方法适合研究岩质边坡的稳定性,易于技术可行、经济合理、简便实用地确定最终边坡角。

关键词: 露天开采, 边坡稳定性, 最终边坡角, 快速拉格朗日有限差分法, 锚索加固

Abstract: At the boundary of the Bijigou open pit,the final height of the slope is 510 m,half of the slope and half of the depressed surface.Side slopes at line 8~15 is complex in shape.In order to determine the reasonable final slope angle,the slope stability of several typical sections was studied by FLAC3D,and the slope angle and the step structure parameters were determined respectively.And the local reinforcement parameters for each part are put forward.This method is suitable for studying the stability of rock slope,and determining the final slope angle in feasible,economical and reasonable ways.

Key words: Open-pit mining, Slope stability, The final sloping angle, Fast Lagrange finite difference method (FLAC3D) , Anchor cable reinforcement