组合振动筛运动学仿真分析与参数匹配研究

金属矿山 ›› 2019, Vol. 48 ›› Issue (03): 156-160.

组合振动筛运动学仿真分析与参数匹配研究

徐丽¹，张杰¹，郭年琴²

1. 南昌工学院机械与车辆学院江西南昌 330108；2. 江西理工大学机电工程学院江西赣州 341000

出版日期:2019-03-25 发布日期:2019-04-30
基金资助:
* 江西省教育厅科技项目基金（编号：GJJ12334）。

Kinematics Simulation Analysis and Parameter Matching Research of Combined Vibrating Screen

Xu Li¹，Zhang Jie¹，Guo Nianqin²

1. Institute of Machinery and Vehicles， Nanchang Institute of Technology，Nanchang 330108，China；2. School of Mechanical and Electrical Engineering，Jiangxi University of Science and Technology，Ganzhou 341000，China

Online:2019-03-25 Published:2019-04-30

摘要/Abstract

摘要： 为了研究组合振动筛的振动特性和运动参数匹配，用Solidworks建立组合振动筛三维模型，并用ADAMS进行运动学仿真分析。通过对GDZS2460/2型上、下单元组合振动筛虚拟设计与仿真，得到该组合振动筛上单元振动筛的振幅为4.67 mm，工作频率为16.18 Hz，筛面倾角为23°；下单元筛的振幅为9.16 mm，工作频率为12.16 Hz，筛面倾角为20°。上、下单元筛参数的合理匹配，能使物料在上单元振动筛较快速移动和分层，在下单元振动筛松散、透筛，从而提高组合振动筛的处理能力和筛分效率，更好地满足不同的生产需求，解决潮湿细颗粒物料难筛分的问题，并提高使用寿命。

关键词: 组合振动筛, 运动学仿真, 参数匹配

Abstract: In order to study the vibration characteristics and the matching of motion parameters of the combined shaker， a three-dimensional model of the combined shaker was established by Solidworks， and kinematics simulation analysis was carried out by ADAMS. Through the virtual design and simulation of GDZS2460/2 upper and lower unit combined vibrating screen， it is obtained that the amplitude of the upper unit vibrating screen is 4.67 mm， the working frequency is 16.18 Hz， the inclination angle of the screen surface is 23°， and the amplitude of the lower unit screen is 9.16 mm， the working frequency is 12.16 Hz， and the inclination angle of the screen surface is 20°. Reasonable matching of the parameters of upper and lower unit sieves can make the material moving and layering faster in the upper unit and loosening and penetrating in the lower unit， so as to improve the processing capacity and screening efficiency of the combined vibration sieves， better meet different production needs， solve the problem of difficult screening of wet fine particles， and improve the service life.

Key words: Combined vibrating screen, Kinematics simulation, Parameter matching

徐丽, 张杰, 郭年琴. 组合振动筛运动学仿真分析与参数匹配研究[J]. 金属矿山, 2019, 48(03): 156-160.

XU Li, ZHANG Jie, GUO Nian-Qin. Kinematics Simulation Analysis and Parameter Matching Research of Combined Vibrating Screen[J]. Metal Mine, 2019, 48(03): 156-160.

扫码分享