欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2020, Vol. 49 ›› Issue (04): 159-164.

• 机电与自动化 • 上一篇    下一篇

副井信号操车设备远程控制设计与应用

张 卫 李 建   

  1. 安徽开发矿业有限公司,安徽 霍邱237400
  • 出版日期:2020-04-15 发布日期:2020-04-30

Design and Application of Remote Control for Signal Operating Equipment of Hoist

Zhang Wei Li Jian   

  1. Anhui Development Mining Co., Ltd., Huoqiu 237400, China
  • Online:2020-04-15 Published:2020-04-30

摘要: 副井信号操车设备远程控制系统是数字化矿山建设的重要组成部分,此系统应用计算机网络技术、可编程控制器技术、无线通信技术、传感器检测技术和视频监控技术,以总线冗余、Profibus-DP现场总线控制和工业以太网为基础组成的数字化网络控制系统。通过将原系统分段独立的控制方式改造成集中遥控和远程操作的方式来减少副井提升机各中段水平的岗位操作人员数量、提高设备的安全性和生产效率,适用于地下矿山企业的长期生产工况作业,是智慧化矿山建设的必然趋势。

关键词: 副井提升机 , 远程控制, 信号操车, 无线通讯

Abstract: The remote control system of the signal operation equipment of the auxiliary shaft is an important part in construction of the digital mine. The system applies computer network technology, programmable controller technology, wireless communication technology, sensor detection technology and video monitoring technology, and is a digital network control system based on bus redundancy, Profibus-DP field bus control and industrial Ethernet. It is the inevitable trend of intelligent mine construction to reduce the number of post operators at each middle level of auxiliary shaft hoist, improve the safety and production efficiency of equipment, and apply to the long-term production conditions of underground mine enterprises by transforming the original system into centralized remote control and remote operation mode.

Key words: Auxiliary shaft hoist, Remote control, Signal operation, Wireless communication