欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2026, Vol. 55 ›› Issue (10): 174-180.

• • 上一篇    下一篇

某伴生银镉铟热液蚀变型硫化铜锌矿石的工艺矿物学特征

林 瑶1,2 ,李芬香1,2 ,葛阳阳1,2 ,路 峰1,2 ,张凯熙1,2 ,季彦钊1,2 ,王孟挺1   

  1. 1.河北省地质实验测试中心,河北 保定 071051;2.河北省矿产资源与生态环境监测重点实验室,河北 保定 071051
  • 出版日期:2026-11-03 发布日期:2026-11-09
  • 通讯作者: 路 峰(1988—),男,正高级工程师,硕士。
  • 作者简介:林 瑶(1988—),男,高级工程师,硕士。
  • 基金资助:
    保定市科技计划项目(编号:2141ZF324)

Process Mineralogy Characteristics of a Associated Silver-Cadmium-Indium Hydrothermal Altered Copper-Zinc Sulfide Ore

LIN Yao1,2 ,LI Fenxiang1,2 ,GE Yangyang1,2 ,LU Feng1,2 ,ZHANG Kaixi1,2 ,JI Yanzhao1,2 ,WANG Mengting1   

  1. 1.Hebei Research Center for Geoanalysis,Baoding 071051,China; 2.Hebei Key Laboratory of Mineral Resources and Ecological Environment Monitoring,Baoding 071051,China
  • Online:2026-11-03 Published:2026-11-09

摘要: 为给涞源某热液蚀变型铜锌矿石的后续开发利用确定合理的选矿工艺流程提供依据,采用化学分析、 光学显微镜观察、XRD分析及电子探针分析等手段,系统研究了矿石的化学成分、矿物组成、结构构造、嵌布特征、粒 度分布及有用元素赋存状态等工艺矿物学特征。结果表明,矿石中有用元素主要为Zn和Cu,含量分别为1.98%和 1.13%;S含量为17.85%,属高硫型铜锌矿石;伴生有价元素Ag、Cd、In的含量分别为71、90和21 g/t。闪锌矿、黄铜 矿和黄铁矿是主要可回收矿物,三者之间常呈连生或相互包裹,增加了解离难度,尤其是闪锌矿中呈包裹物或固溶体 分离物产出的黄铜矿粒度细小,需在选矿中细磨以实现单体解离。此外,与目的矿物呈镶嵌关系的绿泥石和白云石 因硬度低、易泥化,将影响闪锌矿和黄铜矿的回收效果。伴生有价元素分布较为分散,未见独立矿物,独立回收难度较 大。根据以上结果,建议采用优先浮选工艺:先浮选获得高质量铜精矿,再进行铜粗选,所得铜粗精矿再磨再选;对铜 粗选尾矿进行黄铁矿浮选,选硫尾矿再选锌;伴生有价元素Ag、Cd、In可在铜、锌精矿中分别计价回收。

关键词: 热液蚀变 , 铜锌矿石 , 矿物组成 , 工艺矿物学

Abstract: To provide a basis for determining a reasonable beneficiation process for the subsequent development and utili zation of a hydrothermal alteration-type copper-zinc ore from Laiyuan,the process mineralogical characteristics including chemi cal composition,mineral composition,texture and structure,dissemination characteristics,particle size distribution and occur rence states of valuable elements were systematically investigated by chemical analysis,optical microscopy,X-ray diffraction and electron probe microanalysis.The results show that the valuable elements in the ore are mainly Zn and Cu,with contents of 1.98% and 1.13%,respectively;The S content is 17.85%,indicating a high-sulfur type copper-zinc ore.The associated valua ble elements Ag,Cd and In have contents of 71,90 and 21 g/t,respectively.Sphalerite,chalcopyrite and pyrite are the main re coverable minerals,which are often intergrown or mutually enclosed,increasing the difficulty of liberation. In particular,the fine-grained chalcopyrite occurring as inclusions or exsolution products in sphalerite requires fine grinding to achieve libera tion.In addition,chlorite and dolomite intergrown with the target minerals have low hardness and are prone to slime formation, which will affect the recovery of sphalerite and chalcopyrite.The associated valuable elements are relatively dispersed without independent minerals,making their individual recovery difficult.Based on the above results,a preferential flotation process is recommended:copper concentrate is first floated,followed by copper roughing,with the copper rough concentrate reground and re-cleaned;Pyrite flotation is conducted on the copper roughing tailings,and zinc flotation is carried out on the sulfur flotation tailings.The associated valuable elements Ag,Cd and In can be recovered and separately priced in the copper and zinc concen trates.

Key words: hydrothermal alteration,copper-zinc ore,mineral composition,process mineralogy

中图分类号: