欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2026, Vol. 55 ›› Issue (10): 197-202.

• • 上一篇    下一篇

江西某脉石英联合工艺制备4N级高纯石英砂试验

杨华泽1 ,钟 豫2 ,张刚友3 ,魏桢伦3 ,李育彪3   

  1. 1.江西省地质局第一地质大队,江西 南昌 330052;2.江西省地质局生态地质大队,江西 南昌 330025; 3.武汉理工大学资源与环境工程学院,湖北 武汉 430070
  • 出版日期:2026-11-03 发布日期:2026-11-09
  • 通讯作者: 李育彪(1985—),男,教授,博士,博士研究生导师。
  • 作者简介:杨华泽(1987—),男,高级工程师,硕士。
  • 基金资助:
    中国工程院战略研究与咨询项目(编号:2024-XZ-20)。

Experiment on Preparation of 4N Grade High Purity Quartz Sand by a Combined Process of Vein Quartz in Jiangxi

YANG Huaze1 ,ZHONG Yu2 ,ZHANG Gangyou3 ,WEI Zhenlun3 ,LI Yubiao3   

  1. 1.The First Geological Brigade of Jiangxi Geological Bureau,Nanchang 330052,China; 2.Ecological Geology Brigade of Jiangxi Geological Bureau,Nanchang 330025,China; 3.School of Resources and Environmental Engineering,Wuhan University of Technology,Wuhan 430070,China
  • Online:2026-11-03 Published:2026-11-09

摘要: 随着半导体、光伏等战略性新兴产业的快速发展,高纯石英砂作为关键基础材料的重要性日益凸显,其 供给保障愈发紧迫。为促进国内石英资源的高值化利用,本研究以江西某脉石英为原料,综合运用X射线衍射 (XRD)、电感耦合等离子体质谱(ICP-MS)和光学显微镜等手段,系统分析了石英砂的矿物组成、化学成分及岩矿特 征。采用“破碎—筛分—磁选—擦洗—浮选—焙烧水淬—酸浸”联合工艺进行提纯试验。结果表明:原矿主要矿物为 石英,杂质含量较低(约0.1%),SiO2 含量为99.896 6%;手标本呈玻璃光泽至油脂光泽,断口可见台阶状密集环纹, 局部发育少量裂纹。经联合工艺提纯后,最终获得SiO2 含量为99.990 6%的高纯石英砂,总杂质含量为94.00 μg/g, 其中Al、K、Li、Na含量分别为59.90、12.31、11.24和7.86 μg/g,产品达到中端高纯石英砂质量标准。研究结果可为 该地区脉石英矿制备高纯石英砂提供技术参考。

关键词: 高纯石英砂 , 工艺矿物学 , 磁选 , 浮选 , 焙烧—酸浸

Abstract: With the rapid development of strategic emerging industries such as semiconductors and photovoltaics,the im portance of high-purity quartz sand as a critical foundational material has become increasingly prominent,and its supply securi ty is growing ever more urgent.To promote the high-value utilization of domestic quartz resources,a vein quartz from Jiangxi Province was investigated in this study.The mineral composition,chemical components and petrographic characteristics of the quartz sand were systematically analyzed using X-ray diffraction (XRD),inductively coupled plasma mass spectrometry (ICP MS) and optical microscopy.A combined process of “crushing,sieving,magnetic separation,scrubbing,flotation,roasting with water quenching and acid leaching” was adopted for purification.The results show that the raw ore is mainly composed of quartz with low impurity content (approximately 0.1%) and a SiO2 grade of 99.896 6%.The hand specimen exhibits vitreous to greasy luster,with stepped dense rings visible on the fracture surface and a few local cracks.After the combined purification process,a high-purity quartz sand with SiO2 content of 99.990 6% was obtained,with total impurity content of 94.00 μg/g, and Al,K,Li and Na contents of 59.90,12.31,11.24 and 7.86 μg/g,respectively,meeting the quality standard for medium grade high-purity quartz sand.This study provides technical reference for the production of high-purity quartz sand from vein quartz resources in this region.

Key words: high-purity quartz sand,process mineralogy,magnetic separation,flotation,roasting-acid leaching

中图分类号: