欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2026, Vol. 55 ›› Issue (10): 283-289.

• 地质与测量 • 上一篇    下一篇

矿井复杂管网三维精细化建模的BIM-GIS法

代翔宇1 ,益鹏举1 ,朱 康2 ,董金明3   

  1. 1.河南测绘职业学院空间信息工程学院,河南 郑州 450000;2.河南省遥感院,河南 郑州 450000; 3.安阳学院计算机科学与数学学院,河南 安阳 455000
  • 出版日期:2026-11-03 发布日期:2026-11-10
  • 通讯作者: 朱 康(1989—),男,工程师,硕士。
  • 作者简介:代翔宇(1988—),男,讲师,硕士。
  • 基金资助:
    河南省住房城乡建设科学技术计划项目(编号:HNJS-2024-K29)。

BIM-GIS Method for 3D Refined Modeling of Complex Mine Pipeline Networks

DAI Xiangyu1 ,YI Pengju1 ,ZHU Kang2 ,DONG Jinming3   

  1. 1.School of Spatial Information Engineering,Henan College of Surveying and Mapping,Zhengzhou 450000,China; 2.Henan Provincial Institute of Remote Sensing,Zhengzhou 450000,China; 3.School of Computer Science and Mathematics,Anyang University,Anyang 455000,Chin
  • Online:2026-11-03 Published:2026-11-10

摘要: 矿井复杂管网三维精细建模面临多源数据融合难度大、坐标系统一精度不足、几何建模与空间分析协 同性差等工程与技术挑战。针对上述问题,提出了一种基于建筑信息模型(Building Information Modeling,BIM)与地理 信息系统(Geographic Information System,GIS)技术的矿井复杂管网三维精细化建模方法(BIM-GIS法)。首先,采用七 参数转换法与布尔沙模型完成多源坐标系统一,并结合MD5哈希算法与中位数填充法进行数据清洗和预处理,为后 续建模提供统一空间基准;其次,利用Revit二次开发构建BIM管网模型,借助极坐标参数化方法生成三维表面网格, 确保模型中各节点(如三通、弯头)之间的接口方向与空间位置精准对接。最后,由于BIM建模采用Revit内部局部坐 标系,需进一步建立坐标转换矩阵,将模型坐标映射至WGS84等地理空间坐标,实现与GIS三维地质模型的空间耦 合。以淮北某矿某一水平的管网为例进行方法验证,结果表明:数据融合RMSE为4.2 mm,复杂节点连接误差为5.7 mm,建模时间为12.5 h,压缩后模型容量为6.32 GB,数据一致性达到98.76%。研究成果为矿井复杂管网的高精度 建模与空间对齐提供了一种技术可复用的解决方案。

关键词: 矿井复杂管网 , BIM , GIS , 三维精细化建模 , 多源数据融合 , 坐标转换

Abstract: Three-dimensional refined modeling of complex mine pipeline networks faces engineering and technical chal lenges,including considerable difficulty in multi-source data fusion,insufficient accuracy in coordinate system unification,and poor synergy between geometric modeling and spatial analysis.To address these challenges,a 3D refined modeling method for complex mine pipeline networks based on Building Information Modeling (BIM) and Geographic Information System (GIS) technologies is proposed (hereinafter referred to as the BIM-GIS method).First,the seven-parameter transformation method and the Bursa model are used to unify multi-source coordinate systems,and the MD5 hashing algorithm and median filling method are combined for data cleaning and preprocessing,thereby providing a unified spatial reference for subsequent model ing.Second,a BIM pipeline network model is constructed through secondary development in Revit,and 3D surface meshes are generated using a polar coordinate parameterization method,ensuring precise alignment of interface orientations and spatial po sitions at nodes (e.g.,tees and elbows) in the model.Finally,since BIM modeling uses Revit′s internal local coordinate sys tem,a coordinate transformation matrix is further established to map the model coordinates to geospatial coordinates such as WGS84,thereby achieving spatial coupling with the GIS-based 3D geological model.The proposed method is validated using the pipeline network at a specific mining level of a mine in Huaibei as a case study.The results show that the RMSE of data fu sion is 4.2 mm,the connection error of complex nodes is 5.7 mm,the modeling time is 12.5 h,the compressed model size is 6.32 GB,and the data consistency reaches 98.76%.These findings provide a technically reusable solution for high-precision modeling and spatial alignment of complex pipeline networks.

Key words: complex mine pipeline network,BIM,GIS,3D refined modeling,multi-source data fusion,coordinate transfor mation

中图分类号: