欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2026, Vol. 55 ›› Issue (10): 62-71.

• • 上一篇    下一篇

基于充填体侧限压缩承载机制的地表及岩移角变形规律研究

于庆磊 ,黄林浩 ,杨学瑞 ,万虎虎 ,贾淯斐   

  1. 东北大学资源与土木工程学院,辽宁 沈阳 110819
  • 出版日期:2026-11-03 发布日期:2026-11-09
  • 作者简介:于庆磊(1981—),男,教授,博士,博士研究生导师。
  • 基金资助:
    国家自然科学基金项目(编号:52474094)。

Deformation Behavior of Ground Surface and Rock Movement Angle Considering the Confined Compressive Load-Bearing Mechanism of Backfill

YU Qinglei ,HUANG Linhao ,YANG Xuerui ,WAN Huhu ,JIA Yufei   

  1. School of Resources and Civil Engineering,Northeastern University,Shenyang 110819,China
  • Online:2026-11-03 Published:2026-11-09

摘要: 针对现有充填开采地表变形分析常忽略围岩侧向约束、易误判充填体实际承载性能的问题,以中关铁 矿南部矿区为背景,深入探究了充填体侧限压缩承载机制对地表沉降及岩石移动角的影响规律。通过室内侧限压缩 试验获取充填体应力—应变指数型本构关系,并基于FLAC3D建立三维数值模型,对比分析了考虑侧限压缩承载与否 以及不同矿体倾角与开采厚度引发的岩层移动特征。结果表明:考虑侧限压缩机制时,充填体在围岩约束下的压实 过程显著增大了地表变形,最大下沉位移较常规充填工况最高增加82.77%;随矿体倾角与厚度增大,地表沉降盆地 向矿体上盘偏移,沉降量递增,岩石移动角均呈减小趋势,地表影响范围扩大;且矿体倾角对地表变形及岩移角的影 响程度显著大于矿体厚度。研究揭示了侧限条件下充填体与围岩的协同承载规律,为类似条件矿山充填开采的岩层 控制与安全设计提供了科学依据。

关键词: 侧限压缩 , 矿体倾角 , 矿体厚度 , 地表沉降 , 岩石移动角

Abstract: In view of the problem that the existing analysis of surface deformation in filling mining often ignores the later al constraints of surrounding rock and is easy to misjudge the actual bearing capacity of filling body,taking the southern mining area of Zhongguan Iron Mine as the background,the influence of confined compression bearing mechanism of filling body on surface subsidence and rock movement angle is deeply explored.The stress-strain exponential constitutive relationship of filling body is obtained by indoor confined compression test,and a three-dimensional numerical model is established based on FLAC3D.The characteristics of rock movement caused by confined compression bearing or not,different ore body dip angle and mining thickness are compared and analyzed.The results show that considering the confined compression mechanism,the com paction process of the filling body under the constraint of the surrounding rock significantly increases the surface deformation, and the maximum subsidence displacement is 82.77% higher than that of the conventional filling condition.With the increase of the dip angle and thickness of the ore body,the surface subsidence basin shifts to the hanging wall of the ore body,the settle ment increases,the rock movement angle decreases,and the surface influence range expands.The influence of ore body dip an gle on surface deformation and rock movement angle is significantly greater than that of ore body thickness.The research re veals the cooperative bearing law of filling body and surrounding rock under the condition of lateral restriction,which provides a scientific basis for the strata control and safety design of filling mining in mines with similar conditions.

Key words:  confined compression,orebody dip angle,orebody thickness,surface subsidence,rock movement angle

中图分类号: