切割槽回采工艺中应用 Simba H1354凿岩设备的探讨

金属矿山 ›› 2012, Vol. 41 ›› Issue (05): 60-62+87.

切割槽回采工艺中应用 Simba H1354凿岩设备的探讨

杜远云

玉溪矿业有限公司大红山铜矿

出版日期:2012-05-22 发布日期:2012-05-29

Discussion on Simba H1354 Cutting Groove of Mining Technology

Du Yuanyun

Dahongshan Copper Mine of Yuxi Mining Co.

Online:2012-05-22 Published:2012-05-29

摘要/Abstract

摘要： Simba H1354凿岩设备因其优越性能在国有大中型地下矿山中越来越得到普遍应用，而将其用于切割槽爆破孔的施工在大红山铜矿采矿中曾有先例，但使用效果较差。从生产实际出发，经过多方分析论证，认为采用向上垂直孔布置能解决爆破中存在的诸多问题，而且切割槽的爆破效果会得到明显改善。

关键词: Simba H1354, 垂直孔, 回采切割槽

Abstract: Because of Simba H1354 drilling equipment's remarkable performance in large and medium-sized mining, it has been widely used.But when it used to drilling blasting hole groove construction, the effect is not so good.For example, in the mining of Dahongshan copper mine.From the production practice, vertical hole design can solve the existing problems of blasting.And blasting effect of cutting slots is obvious.

Key words: Simba H1354, Vertical holes, Stopping cutting groove

杜远云. 切割槽回采工艺中应用 Simba H1354凿岩设备的探讨[J]. 金属矿山, 2012, 41(05): 60-62+87.

DU Yuan-Yun. Discussion on Simba H1354 Cutting Groove of Mining Technology[J]. Metal Mine, 2012, 41(05): 60-62+87.

扫码分享