欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2012, Vol. 41 ›› Issue (05): 126-129.

• 机电与自动化 • 上一篇    下一篇

金属矿山安全避险“六大系统”设计思路

毛春雷1,2,许晖1,2   

  1. 1.中钢集团马鞍山矿山研究院有限公司;2.金属矿山安全与健康国家重点实验室
  • 出版日期:2012-05-22 发布日期:2012-05-29

Design Concept about Safety Hedge “Six Systems” in Metal Mine

Mao Chunlei1,2,Xu Hui1,2   

  1. 1.Sinosteel Maanshan Institute of Mining Research Co., Ltd.;2.State Key Laboratory of Safety and Health for Metal Mine
  • Online:2012-05-22 Published:2012-05-29

摘要: 要做到安全避险“六大系统”合理的设计,需要结合矿山现场实际,综合考虑各种因素。以生产矿山的开拓、采准、采、出、运等生产中段为设计范围,提出了三网合一的设计思路,明确了井下避灾硐室数量的确定及配置原则,提出了生产矿山独立供水、联合供风的自救方案优选准则。确保“六大系统”设备仪器的设计选型合理,在抵御各种风险和灾变时能真正发挥安全保障作用。  

关键词: 六大系统, 监测监控, 人员定位, 避灾硐室, 自救器

Abstract: In order to designing the safety hedge “six system”  reasonable, it should be considering the states of the mining filed and combining various factors.Development, mining preparation, mining, out and carriage were considered in design.It puts forward the design thought way about triple-play, clarified the number and the principle of the avoid disaster chamber.The optimization criteria which supply independent rescue water and the supply joint rescue wind self-rescue program in the producing mines are proposed.It guarantees design and selection rational of facility and equipment in the “six systems”, which will play the security role in deal with catastrophe and all kinds of risks.

Key words: Six system, Monitoring and supervision, Personnel regional positioning, Avoid disaster chamber, Self-rescuer