双壁钻具导正块处压力模型

金属矿山 ›› 2012, Vol. 41 ›› Issue (09): 114-116.

双壁钻具导正块处压力模型

马广军^1,2，任红³，王京印¹，朱丽红¹

1.中国石油大学（华东）石油工程学院；2.中国石化石油工程技术研究院；3.胜利石油管理局钻井工艺研究院

出版日期:2012-09-15 发布日期:2012-10-09
基金资助:
* 国家重点基础研究发展计划(973计划)项目(编号：2010CB226703)，山东省自然科学基金项目(编号ZR2011EEQ012)，中央高校基本科研业务费专项资金项目(编号27R1202001A)，新教师博士点基金项目(编号：20110133120013)。

Pressure Model of Correcting Block in Double Wall Drilling Tool

Ma Guangjun^1,2，Ren Hong³，Wang Jingyin¹，Zhu Lihong¹

1.School of Petroleum Engineering, China University of Petroleum, China；2.SINOPEC Research Institute of Petroleum Engineering；3.Drilling Technology Research Institute,Shengli Oilfield

Online:2012-09-15 Published:2012-10-09

摘要/Abstract

摘要： 气体反循环钻井技术是欠平衡钻井技术的重要分支，以压缩气体为主的钻井循环流体沿双壁钻具环状间隙到达井底。在双壁钻具的内外管之间有同轴定位装置导正块，导正块的存在使该处流场更加复杂。针对双壁钻具内外管间导正块处压力参数开展研究，基于流体力学通过数学推导，建立导正块处压力模型。结合实际工程算例，编程计算，对模型进行求解，得出由于导正块存在而导致的总压力损失值，为进一步探索整个循环系统压力模型提供了有力依据。

关键词: 反循环, 双壁钻具, 导正块, 压力模型

Abstract: Air drilling, as a member of under balance pressure drilling family, is different from conventional drilling methods.The drilling fluid along double wall drilling tool annular gap reach the hole bottom.There is a positioning device which is also called correcting block between the inner tube and the outer tube of the double wall, and because of the correcting block, the flow field is more complex.The pressure parameter of correcting block between the inner tube and the outer tube of the double wall is researched.Based on the fluid dynamics, pressure model is built through mathematical derivation.Combined with practical engineering examples, programming calculations, the model is solved.The total pressure loss value as a result of correcting blocks is obtained.It provides a strong basis to further explore the entire circulatory system pressure model.

Key words: Reverse circulation, Double wall drilling tool, Correcting block, Pressure model

马广军, 任红, 王京印, 朱丽红. 双壁钻具导正块处压力模型[J]. 金属矿山, 2012, 41(09): 114-116.

MA Guang-Jun, REN Hong, WANG Jing-Yin, ZHU Li-Hong. Pressure Model of Correcting Block in Double Wall Drilling Tool[J]. Metal Mine, 2012, 41(09): 114-116.

[1]	赵江鹏, 刘建林, 赵建国. 矿山大口径钻孔循环钻进技术研究[J]. 金属矿山, 2018, 47(01): 147-151.
[2]	赵江鹏. 大直径集束式潜孔锤反循环钻进方法先导性试验[J]. 金属矿山, 2015, 44(10): 121-124.
[3]	朱丽红, 殷琨, 涂建华, 黄勇, 刘建林, 任红. 基于CFD的反循环钻头内喷孔直径参数研究[J]. 金属矿山, 2012, 41(05): 130-132+155.
[4]	王光磊, 任红, 李文飞, 陈新勇. 基于计算流体动力学的导正块结构优化[J]. 金属矿山, 2012, 41(02): 135-137.
[5]	陈良, 杨志, 朱丽红. 气体正循环钻井压力模型[J]. 金属矿山, 2011, 40(11): 135-137.
[6]	庄生明, 王茂森, 博坤, 李冬霜. CSR钻探工艺流场的仿真模拟分析[J]. 金属矿山, 2011, 40(02): 122-124.
[7]	博坤, 殷琨, 王茂森. 贯通式潜孔锤反循环钻进技术在矿区勘探中的应用研究[J]. 金属矿山, 2009, 39(03): 133-136.
[8]	赵千里, 高谦, 高创州, 薛希忠, 于志强. 隔断或引射风流型矿用空气幕理论模型分析[J]. 金属矿山, 2007, 37(11): 111-114.

扫码分享