云南某氧化铜矿石选矿试验

金属矿山 ›› 2013, Vol. 42 ›› Issue (07): 79-82.

云南某氧化铜矿石选矿试验

刘豹^1,2，孙乾予²，刘淼²

1.东北大学资源与土木工程学院；2.辽宁工程技术大学矿业学院

出版日期:2013-07-15 发布日期:2013-08-12

Beneficiation Tests of a Copper Oxide Ore from Yunnan

Liu Bao^1,2，Sun Qianyu²，Liu Miao²

1.College of Resources and Civil Engineering，Northeastern University; 2.College of Mining,Liaoning Technical University

Online:2013-07-15 Published:2013-08-12

摘要/Abstract

摘要： 云南某难选氧化铜矿石氧化程度高、泥化严重，有用矿物嵌布粒度粗细不均，其中硫化铜矿嵌布粒度较粗。按先浮硫化铜矿物，再浮氧化铜矿物的原则流程进行了选矿工艺技术条件研究。结果表明，氧化铜矿物采用分级分选工艺可以有效解决矿泥通过中矿返回不断循环、积累的问题；闭路流程最终获得了铜品位为21.43%、回收率为47.73%的硫化铜精矿和铜品位为17.41%、回收率为19.39%的氧化铜精矿，综合精矿的铜品位为20.09%、回收率为67.12%。

关键词: 硫化铜矿物, 氧化铜矿物, 分级分选

Abstract: A refractory copper oxide in Yunnan with high degree of oxidation，serious mudding，fine or uneven disseminated size of useful minerals，and coarse disseminated copper sulfide,etc. Technical condition tests for beneficiation are made by the principle of firstly floating copper sulphide minerals and then floating copper oxide minerals. The results show that for copper oxide minerals，the grading separation process can effectively resolve the sludge constantly circulating and accumulating problems during the whole flow-sheet. Through the closed circuit，copper sulfide concentrate with Cu grade of 21.43%，and recovery of 47.73%，copper oxide concentrate with Cu grade of 17.41% and recovery of 19.39%，are gained respectively. In total concentrates，Cu grade is 20.09% and Cu recovery is 67.12%.

Key words: Copper sulphide minerals, Copper Oxide minerals, Grading separation

刘豹, 孙乾予, 刘淼. 云南某氧化铜矿石选矿试验[J]. 金属矿山, 2013, 42(07): 79-82.

LIU Bao, SUN Qian-Yu, LIU Miao. Beneficiation Tests of a Copper Oxide Ore from Yunnan[J]. Metal Mine, 2013, 42(07): 79-82.

[1]	邹勤, 龙冰, 雷小明, 杨长安, 刘诚. 国外某低品位铜锌硫化矿浮选分离试验研究[J]. 金属矿山, 2020, 49(09): 111-117.
[2]	刘方华. 国外某沉积岩型难选硫氧混合铜矿石浮选试验[J]. 金属矿山, 2019, 48(11): 73-78.
[3]	时文革, 巩恩普, 姚玉增, 张永利, 李子涵. 新疆滴水铜矿石工艺矿物学研究[J]. 金属矿山, 2015, 44(05): 114-118.
[4]	耿伟利, 罗天明, 郭文军. 我国细粒铅锌矿浮选技术现状及发展[J]. 金属矿山, 2015, 44(03): 116-119.

扫码分享