电动轮自卸车车厢结构有限元建模与分析

金属矿山 ›› 2010, Vol. 39 ›› Issue (02): 117-120.

电动轮自卸车车厢结构有限元建模与分析

孙士平¹, 王菲茹¹, 朱贤银², 张鸿平²

1.南昌航空大学；2江西铜业集团（德兴）铸造有限公司

出版日期:2010-02-15 发布日期:2010-11-09
基金资助:
江西省教育厅科技项目（编号：GJJ09189），南昌航空大学科学基金项目（编号：EA200703093，EC200803153）。

The Finite Element Modeling and Analysis of the Haul Track's Body

SUN Shi-Ping¹, WANG Fei-Ru¹, ZHU Xian-Yin², ZHANG Hong-Ping²

1.Nanchang Hangkong University；2.Jiangxi Copper Corporation（Dexing）Cast Co., Ltd.

Online:2010-02-15 Published:2010-11-09

摘要/Abstract

摘要： 通过测绘建立电动轮自卸车车厢结构的三维实体模型，采用壳单元、焊接单元和实体单元实现车厢结构的有限元网格划分，在归纳车厢工作载荷特征的基础上，建立了车厢结构有限元模型。针对典型载荷工况对车厢结构进行了有限元分析，获得了车厢结构的应力场和位移场分布，计算结果符合车厢使用损坏情况，对车厢的结构改进与制造维修具有指导意义。

关键词: 车厢, 电动轮自卸车, 结构建模, 结构分析

Abstract: The CAD model is built by mapping the structure of the track's body.The body structure is meshed with shell element, weld element and solid element.The finite element modeling of the loading cases are built by studying the employment characteristic of the truck.The finite element analysis on track structure for the representative loading case is made and the distribution of the stresses and the displacements of the body are obtained.Numerical results conform to the practical utilization of track, thus providing a guiding meaning for improving and maintaining the tracks.

Key words: Body, Haul Track, Structural Modeling, Structural Analysis

孙士平, 王菲茹, 朱贤银, 张鸿平. 电动轮自卸车车厢结构有限元建模与分析[J]. 金属矿山, 2010, 39(02): 117-120.

SUN Shi-Ping, WANG Fei-Ru, ZHU Xian-Yin, ZHANG Hong-Ping. The Finite Element Modeling and Analysis of the Haul Track's Body[J]. Metal Mine, 2010, 39(02): 117-120.

扫码分享