Metal Mine ›› 2007, Vol. 37 ›› Issue (09): 106-108.
Previous Articles Next Articles
Wang Yingli1,Yu Huajiang1,2,Ma Zichuan1,Jia Miying1
Online:
Published:
Abstract: Oxalic acid-modified manganese ore and natural manganese ore were used as adsorbents for Ni2+removal from water. The effect of pH value, adsorption time and adsorbent dosage on the Ni2+removal rate was investigated and the saturated adsorption amount was measured. The results show that Ni2+adsoption-pH curve is of S type and the Ni2+adsoption rate is increased with the increase of the adsorption time and the addition of the modified manganese ore. Under the conditions of 25 ℃, pH=0.7 and a adsorbent concentration of 0.2 g/L, modified and natural manganese ores have a saturated adsorption amount for Ni2+ of 32.3 and 11.6 mg[Ni2+] respectively, with the former's adsorption amount being 2.8 times that of the latter. Therefore, modified manganese ore is expected to become a new adsorptive material for treating water containing Ni2+.
Key words: Oxalic acid-modified manganese ore, Natural manganese ore, Ni2+ adsorption
WANG Ying-Li, YU Hua-Jiang, MA Zi-Chuan, JIA Mi-Ying. Ni2+ Removal from Water by Adsorption Using Oxalic Acid-Modified Manganese Ore[J]. Metal Mine, 2007, 37(09): 106-108.
/ Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.jsks.net.cn/EN/
http://www.jsks.net.cn/EN/Y2007/V37/I09/106