上下位机用于矿用电铲动态称重系统的设计

金属矿山 ›› 2008, Vol. 38 ›› Issue (12): 105-108.

上下位机用于矿用电铲动态称重系统的设计

周小凤¹，肖俊生²，李玉军³

1.包头职业技术学院；2.内蒙古科技大学；3.包头钢铁集团薄板厂

收稿日期:2008-08-11 出版日期:2008-12-15 发布日期:2011-07-11

Design of Dynamic Weighing System for Mining Electrical Shovels Based on Master and Slave Computers

Zhou Xiaofeng¹，Xiao Junsheng²，Li Yujun³

1.Baotou Vocational & Technical College；2.Inner Mongolia University of Science & Technology;3 Baotou Steel Group Sheet Plant

Received:2008-08-11 Online:2008-12-15 Published:2011-07-11

摘要/Abstract

摘要： 介绍了在电铲上对矿物在线动态称重系统的设计，由下位机控制采集数据，并把数据通过串行通信传送给上位机做运算。首先根据动力学知识分析影响铲斗重量的所有变量，依据这些变量的特征和范围选择合适的传感器来进行测量。下位机AT89C52控制定时采样，并把采样值传送给上位机PC机，在PC机上应用Visual C++语言进行运算、存储及显示。

关键词: 电铲, 动态称重, 上下位机, 串行通信

Abstract: The design of the online dynamic ore-weighing system for electrical shovels is presented. In the system, the slave computer collects the data and transmits them to the master computer through serial communication for computing. All variables that may influence the shovel weight are analyzed by dynamic knowledge and suitable sensors are selected for measuring them according to their characteristics and scope. The slave unit AT89C52 controls a periodic sampling and transmits the sampling values to the master PC, which does the computing, memory and display based on Visual C++ language.

Key words: Electric shovels, Dynamic weighing, Master and slave computers, Serial communication

周小凤, 肖俊生, 李玉军. 上下位机用于矿用电铲动态称重系统的设计[J]. 金属矿山, 2008, 38(12): 105-108.

ZHOU Xiao-Feng, XIAO Jun-Sheng, LI Yu-Jun. Design of Dynamic Weighing System for Mining Electrical Shovels Based on Master and Slave Computers[J]. Metal Mine, 2008, 38(12): 105-108.

[1]	肖俊生, 周小凤. 基于传感器网络技术的矿用电铲动态称重系统[J]. 金属矿山, 2012, 41(10): 104-107.
[2]	秦涛, 才庆祥, 张丁, 周伟, 陈树召. 495HR电铲不同铲斗容积生产能力分析[J]. 金属矿山, 2011, 40(09): 134-136.
[3]	陈宝民, 李作伟, 刘东玲. 295BⅡ电铲动臂开裂修理经验[J]. 金属矿山, 2009, 39(1): 179-181.