欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2008, Vol. 38 ›› Issue (12): 12-15.

• 采矿工程 • 上一篇    下一篇

大进路无轨机械化联合充填连续开采新技术

阳雨平,周旭,王贻明,任建平   

  1. 中南大学
  • 收稿日期:2008-08-19 出版日期:2008-12-15 发布日期:2011-07-11
  • 基金资助:

    “十一五”国科技支撑计划项目(编号:2006BAB02A01)。

New Continuous Mining Technology with Large Access Trackless Mechanized Combined Filling

Yang Yuping,Zhou Xu,Wang Yiming,Ren Jianping   

  1. Central South University
  • Received:2008-08-19 Online:2008-12-15 Published:2011-07-11

摘要: 结合云南驰宏锌锗股份有限公司会泽铅锌矿深部复杂难采矿体的开采,采用水压支柱护顶联合充填连续开采新技术对传统上向水平分层充填法进行了革新。以单体水压支柱顶板支护为技术核心,采用控制爆破技术,以及组合可拆式隔离墙施工技术和无轨机械化施工技术,扩大进路断面,加大废石充填量,实现了连续开采,确保采场顶板稳定,简化采矿工艺,降低采切工程量;进一步降低贫损指标,提高采矿生产能力。

关键词: 高水压支护, 无轨机械化, 膏体充填, 废石充填, 连续开采

Abstract: In the mining of deep-seated complex deposit in Huize Lead-Zinc Mine of Yunnan Chihong Zinc-Germanium Co., Ltd, the continuous mining technology with hydraulic-prop roof support combined filling was used to reform the traditional upward horizontal slicing filling method. With the roof support by monomer hydraulic props as its technical core, the method also adopts controlled blasting, combined detachable isolation wall and trackless mechanized construction technology, enlarged access section and increased waste rock backfill amount to realize a continuous mining. As a result, the stope roof stability is ensured, the mining process simplified, the cutting engineering quantities reduced, the dilution-loss further reduced and the mining capacity improved.

Key words: High hydraulic props, Trackless mechanization, Paste fillin, Waste rock filling, Continuous mining