某金铜矿选矿工艺优化研究

金属矿山 ›› 2009, Vol. 39 ›› Issue (04): 56-59.

某金铜矿选矿工艺优化研究

张岳

昆明理工大学

出版日期:2009-04-15 发布日期:2011-11-22

Research on the Optimization of Beneficiation Process for a Gold-Copper Mine

Zhang Yue

Kunming University of Science and Technology

Online:2009-04-15 Published:2011-11-22

摘要/Abstract

摘要： 某金铜矿为了给合理确定新建7 000 t/d选矿厂的工艺流程方案提供依据，通过试验对原有900 t/d选矿厂的工艺流程进行了优化研究。结果表明：原流程中所采用的洗矿作业可以取消；原流程所采用的阶段磨浮工艺可简化为一段磨浮工艺；可利用复合捕收剂来提高浮选回收率；浮选尾矿的再处理方案应由原来的单一重选改为重选—再磨—浮选或重选—再磨—氰化浸出。

关键词: 金铜矿, 选矿工艺优化, 磨浮工艺, 复合捕收剂, 浮选尾矿再处理

Abstract: To determine the rational process flowsheet plan for its new 7 000 t/d concentrator, a gold-copper mine conducted a research to optimize its original 900 t/d concentrator's process flowsheet.The result shows that it is better to eliminate the original ore-washing operation; to simplify the original multi-stage grinding-flotation process into one stage grinding-flotation; to use a composite collector to improve the flotation recovery; and to replace the single gravity separation for the retreatment of flotation tailings by gravity separation-regrinding-flotation process or by gravity separation-regrinding-cyanide leaching process. Gold-copper ore, Optimization of beneficiation process|Grinding-flotation process|Composite

Key words: collector, Retreatment of flotation tailings

张岳. 某金铜矿选矿工艺优化研究[J]. 金属矿山, 2009, 39(04): 56-59.

ZHANG Yue. Research on the Optimization of Beneficiation Process for a Gold-Copper Mine[J]. Metal Mine, 2009, 39(04): 56-59.

[1]	左海. 江西某银铅锌多金属硫化矿石选矿工艺优化[J]. 金属矿山, 2017, 46(05): 84-88.
[2]	佟家兴, 杜海鹰, 朱福琴, 刘艺博, 刘秀峰, 刘善军. 融合主成分分析与光谱角匹配的金铜矿遥感探测方法[J]. 金属矿山, 2016, 45(11): 119-123.
[3]	丛颖. 青海某难选铜矿石选铜工艺优化研究[J]. 金属矿山, 2015, 44(11): 74-77.
[4]	印万忠, 马英强, 孙洪硕, 吴浩, 张丽丽, 陆欢欢. 吉林某低品位铜镍硫化矿石选矿工艺优化研究[J]. 金属矿山, 2013, 42(04): 77-81+85.