欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2009, Vol. 39 ›› Issue (09): 165-168.

• 安全与环保 • 上一篇    下一篇

测压钻孔三相泡沫密封液的试验研究

禹东方1,陈学习2,马尚权2,柏松2   

  1. 1.北京大学;2.华北科技学院
  • 出版日期:2009-09-15 发布日期:2011-04-26
  • 基金资助:

    国家重点基础研究“973”项目(编号:2005cb221504),国家“十一五”科技攻关项目(编号:2006BAK03B01)。

Experimental Investigation of Three-phase Foam Sealing Liquid for Gas Pressure Determination Borehole

Yu Dongfang1,Chen Xuexi2,Ma Shangquan2,Bo Song2   

  1. 1. North China Institute of Science and Technology;2.China University of Mining and Technology
  • Online:2009-09-15 Published:2011-04-26

摘要: 为选择合适的封堵钻孔裂隙三相泡沫,通过对3种发泡剂、4种稳泡剂和3种不同粒径范围固相填充物的试验研究,得出了发泡倍数高、稳定时间长和携带固体物能力强的三相泡沫密封液材料配比,即:水溶液质量比0.4%的发泡剂FP-1、1%的稳泡剂WP-3和4%的粒径范围0.2~1 mm的混合固相填充物。现场应用试验表明,该材料配比的三相泡沫封堵测压钻孔裂隙,具有封孔时间短、测定过程快、测定值准确性高等特点,对提高瓦斯压力测定水平具有重要意义。

关键词: 测压钻孔, 三相泡沫, 泡沫性能, 材料配比

Abstract: In order to select suitable three-phase foam for sealing fracture around borehole,3 kinds of foam agents,4 kinds of stabilizing agents and 3 kinds of solid-phase filler with different particle diameter were studied.Three-phase foam sealing liquid proportion with high foamability,good stability and strong ability of carrying solid was obtained.The proportion is: 0.4 percent of foam agent FP-1,1 percent of stabilizing agent WP-3 and 4 percent of mixed solid-phase filler with 0.2 to 1 mm diameter.Practical application shows that this proportional three-phase foam has characteristics of little sealing borehole time,rapid determination process and high determination accuracy,which is meaningful for raising the level of gas determination.

Key words: Gas pressure determination borehole, Three-phase foam, Foam property, Material proportion