欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2009, Vol. 39 ›› Issue (09): 64-69+116.

• 矿物工程 • 上一篇    下一篇

马钢和尚桥铁矿石选矿试验研究

葛新建   

  1. 马钢集团设计研究院有限责任公司
  • 出版日期:2009-09-15 发布日期:2011-04-26

Research on Beneficiation Tests for Masteel Heshangqiao Iron Ores

Ge Xinjian   

  1. MaSteel Group Design & Research Institute Co.,Ltd.
  • Online:2009-09-15 Published:2011-04-26

摘要: 研究了和尚桥铁矿石的矿石特点,进行了矿石的高压辊磨试验研究。在此基础上,按阶段磨矿、阶段选别、细筛及筛上再磨再选和高压辊磨、阶段磨矿、阶段选别、细筛及筛上再磨再选,以及高压辊磨、3~0 mm粗粒抛尾、阶段磨矿、阶段选别、细筛及筛上再磨再选进行了选矿工艺流程的试验研究,分别取得了精矿品位64.87%~66.06%、回收率72.00%左右的较好指标。针对低品位磁铁矿矿石的特点,根据对工艺指标、运行成本和流程合理性的分析对比,推荐高压辊磨、阶段磨矿、阶段选别、细筛及筛上再磨再选和高压辊磨、3~0 mm粗粒抛尾、阶段磨矿、阶段选别、细筛及筛上再磨再选两个流程为和尚桥铁矿石合理选矿工艺流程。

关键词: 铁矿石, 高压辊磨, 粗粒抛尾, 阶段磨矿、阶段选别、细筛再磨再选

Abstract: The ores' characteristics of Masteel Heshangqiao Iron Ore were investigated,and tests on the high-pressure grinding roll were studied.Based on this,a series of beneficiation tests research have been finished from the flow-sheets of stage grinding,stage separation,fine screening,regrinding and re-separation for over-size screening,high pressure grinding roll,stage-separation,fine screening,and again regrinding and re-separation for over-size screening,as well as the flow-sheet of high pressure grinding roll,3~0mm tailing rejection,stage grinding,stage separation,fine screening,and regrinding and re-separation for over-size screenings.A good concentrate grading at 64.87%~66.06% with a 72.00% recovery has been achieved.Due to the characteristics of low grade magnetite,and according to the comparison of the flow-sheet index,operation costs,and flow-sheet reasonability,two flow-sheets consisting of the high-pressure grinding roll,stage grinding,stage separation,fine screening and regrinding and re-separation for over-size screening,as well as the flow-sheet of high-pressure grinding roll,3~0mm tailing rejection,stage grinding,stage separation,fine screening,and regrinding and re-separation for over-size screenings are recommended for Heshangqiao Iron Mine.        

Key words: Iron ore, High pressure Grinding Roll, Tailing rejection for coarse ore, Regrinding and re separation after screening from stage grinding and stage separation