欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2009, Vol. 39 ›› Issue (11): 136-138.

• 安全与环保 • 上一篇    下一篇

复合絮凝剂在四氧化三锰工业污水处理中的应用

马金保,周升旺,李如宏,王金宝   

  1. 中钢集团天源科技股份有限公司南京磁性材料厂
  • 出版日期:2009-11-16 发布日期:2011-04-26

Application of Composite Flocculant to Industrial Wastewater Treatment of Mn3O4

Ma Jinbao,Zhou Shengwang,Li Ruhong,Wang Jinbao   

  1. Nanjing Magnetic Materials Plant,SinoSteel Tianyuan Technology Co., Ltd.
  • Online:2009-11-16 Published:2011-04-26

摘要: 研究了用聚合氯化铝和聚丙烯酰胺复合絮凝剂处理四氧化三锰工业污水,考察了絮凝剂PAC加入量、助凝剂PAM加入量和加入时间对四氧化三锰工业污水絮凝效果的影响。试验结果表明:实验室过程中,在PAC加入量5 mg/L,PAM加入量0.6 mg/L,PAM在PAC加入后30 s加入条件下,复合絮凝剂的絮凝效果最好,浊度去除率可达94.8%,达到了工业污水排放的国家标准。还对复合絮凝剂在工业污水处理应用中应注意的问题进行了简要分析。

关键词: 复合絮凝剂, 四氧化三锰, 工业污水

Abstract: The paper studies the Mn3O4 wastewater treatment with the composite flocculant of Polyaluminium Chloride and investigates the flocculating effects by adding the amount of PAC and PAM and the time required.The experiment results showed that the flocculating effects can be optimum when adding 5 mg/L of PAC, 0.6 mg/L of PAM for 30 min.The turbidity removal rate reached 94.8%, which has been satisfied with the State Standard for Industrial Sewage Discharge.This paper also briefly analyzes some problems in application of composite flocculant to industrial wastewater treatment of Mn3O4.

Key words: Composite flocculant, Mn3O4, Industrial wastewater