欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2010, Vol. 39 ›› Issue (05): 99-103.

• 矿物工程 • 上一篇    下一篇

铬铁粉矿球团烧结新工艺及固结机理研究

朱德庆, 仉宏亮, 潘建   

  1. 中南大学
  • 出版日期:2010-05-15 发布日期:2010-11-09
  • 基金资助:

    湖南省国土资源厅项目(编号:2007K02)。

Study of Chromite Fines Pellet Sintering and its Hardening Mechanism

Zhu Deqing,Zhang Hongliang,Pan Jian   

  1. Central South University
  • Online:2010-05-15 Published:2010-11-09

摘要: 对铬铁精矿进行了常规烧结及球团烧结试验研究,并揭示了固结机理。常规烧结结果表明,在最优条件下,烧结矿成品率为73.16%,利用系数1.17 t/(m2·h),烧结矿转鼓强度61.03%,固体燃耗115.80 kg/t;球团烧结实验表明:在最优条件下,烧结矿成品率为77.18%,利用系数1.47 t/(m2·h),转鼓强度83.78%,固体燃耗107.32  kg/t。与常规烧结相比,球团烧结显著改善了烧结矿产质量,降低了固体燃耗。固结机理研究表明,在常规烧结中,烧结过程形成的液相量仅有17.1%,故烧结矿强度差,产量低;而球团矿烧结中,表层呈单个球团,中下层呈葡萄状粘结构。球团烧结矿固结以铬铁尖晶石、镁铁尖晶石再结晶为主,液相量19%左右,孔隙率下降。球团烧结矿强度由固相固结和液相粘结共同维持,因此,烧结矿强度好、产量高。球团烧结工艺是强化铬矿粉烧结、降低烧结能耗的有效途径之一。

关键词: 铬铁粉矿, 烧结, 球团烧结, 固相固结, 液相粘结

Abstract: The normal sintering and pellet sintering of chromite fines was studied and the consolidation mechanism was revealed.Results of normal sintering showed that under the optimum conditions,yield of 73.16%,productivity of 1.17 t/(m2·h),tumble index of 61.03% and solid fuel consumption of 115.80  kg/t were achieved.In contrast the pellet sintering of chromite fines under optimum conditions indicated better sintering performance proven by the following dexes yield of 77.18%,productivity of 1.47 t/(m2·h),tumble of 83.78% and solid fuel of 107.32  kg/t respectively.Consolidation mechanism showed that in normal sintering process,the liquid phase was only accounted for 19% and higher porosity,resulting in weak sintering and lower productivity.With regard to micro  pellet sintering,sinter from top and middle-lower bed is ding morphology,respectively.Recrystallization of ferro-chromium and ferro-magnesium spinel and some 19% liquid phase along with lower porosity play a significant role in consolidation of sinter made of chromite fines by micropellet sintering,leading to a strong sinter and higher productivity at lower solid fuel.Therefore,pellet sintering is an effective way to promote sintering of chromite fines at lower solid fuel consumption .

Key words: Chromite fines, Sintering, Pellet sintering, Solid phase hardening, Liquid phase bonding