欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2010, Vol. 39 ›› Issue (12): 151-154.

• 安全与环保 • 上一篇    下一篇

斗轮堆取料机射流自激雾化除尘研究

邹声华1,李刚2,3,张奕君1   

  1. 1.湖南科技大学;2.中钢集团马鞍山矿山研究院有限公司;3.金属矿山安全与健康国家重点实验室
  • 出版日期:2010-12-15 发布日期:2010-11-10
  • 基金资助:

    湖南省科技计划项目(编号:2007GK3055)

Research on the Water Spraying Dust-settling of Self-impingement Liquid  Jet in Bucket Wheel Stocker and Reclaimer

Zou Shenghua1,Li Gang2,3,Zhang Yijun1   

  1. 1.Hunan University of Science and Technology; 2.Sinosteel Maanshan Institute of Mining Research Co.,Ltd.;3.State Key Laboratory of Safety and Health for Metal Mine
  • Online:2010-12-15 Published:2010-11-10

摘要: 分析了斗轮堆取料机的产尘机理,针对斗轮堆取料机,提出了射流自激雾化除尘技术。分析射流自激雾化除尘的机理,研究了射流自激雾化除尘系统中的喷射流量、喷射速度、斗轮旋转速度、喷射流与装载斗的接触角等关键参数对除尘效果的影响。现场实践证明,射流自激雾化除尘技术与其他除尘技术相比,优势非常明显:其系统结构简单、投资少、运行可靠;维护简单,无二次处理和二次污染;抗自然风能力强;除尘效率在80%以上。该除尘技术是斗轮堆取料机良好的除尘方式。

关键词: 粉尘治理, 斗轮堆取料机, 射流自激式雾化除尘, 除尘效率

Abstract: This paper analyzes the mechanisms of dust production in bucket wheel stocker and reclaimer,and  proposes water spraying dust-settling technology of self-impingement liquid jet for this machine.Some key parameters of affecting the efficiency of dust control in the water spraying dust-settling of self-impingement liquid jet are investigated,such as flow rate,spraying velocity,rotary speed,jet injection angle between jet flow and loading bucket etc.The practice showed that this water spraying dust settling of self-impingement liquid jet had more ideal effect than other de-dusting technology.It has feature of simple structure,less investment,reliable operation,and easy maintenance without secondary pollution.Due to its high wind resistance ability,dusts can be controlled to be over 80%.So this technique is a good dust removing way for bucket wheel stocker and reclaimer.

Key words: Dust treatment, Bucket wheel stocker and reclaimer, Water spraying dust-settling of self-impingement liquid jet, Efficiency of dust removing