欢迎访问《金属矿山》杂志官方网站,今天是 分享到:

金属矿山 ›› 2011, Vol. 40 ›› Issue (03): 132-135.

• 安全与环保 • 上一篇    下一篇

深井高温矿床井下热源与热量分析

陈宜华1,2,孙浩3   

  1. 1.中钢集团马鞍山矿山研究院有限公司;2.金属矿山安全与健康国家重点实验室;3.铜陵有色集团公司冬瓜山铜矿
  • 出版日期:2011-03-10 发布日期:2011-03-11

Analysis on the Underground Heat Source and Heat of Deep High Temperature Deposits

Chen Yihua1,2,Sun Hao3   

  1. 1.Sinosteel Maanshan Institute of Mining Research Co.,Ltd.;2.State Key Laboratory of Safety and Health
    for Metal Mine;3.Dongguashan Copper Mine of Tongling Nonferrous Metals Group
  • Online:2011-03-10 Published:2011-03-11

摘要: 分析高温矿井的热源和产热量计算方法,以冬瓜山为例,对其井下的热源(围岩散热、机电设备放热、矿岩氧化热、热水放热、人体散热等)及其热量分析计算,说明分析方法的可行性。

关键词: 深井, 高温矿床, 热源

Abstract: The calculation method of heat source and heat generation in high-temperature mine is analyzed.Taking Dongguashan for example,the underground heat source (wallrock heat release,electrical and mechanical equipment heat release,thermal discharge of oxide ore,hot water heat release,human body heat release,etc.) and thermal analysis are calculated out.It is clear that this method is feasible.

Key words: Deep well, High temperature mine, Heat source