锚杆（索）让压装置作用原理及力学特性实验研究

金属矿山 ›› 2011, Vol. 40 ›› Issue (06): 127-129.

锚杆（索）让压装置作用原理及力学特性实验研究

刘波涛^1,2，高明仕^1,2，闫高峰^1,2，袁得江^1,2

1.煤炭资源与安全开采国家重点实验室；2.中国矿业大学矿业工程学院

出版日期:2011-06-08 发布日期:2011-06-09
基金资助:
教育部重点项目（编号：109075）。

Experimental Research on Functional Principle of the Yielding Anchor BoltsCables) and its Mechanical Property

Liu Botao^1,2，Gao Mingshi^1,2，Yan Gaofeng^1,2，Yuan Dejiang^1,2

1.State Key Laboratory of Coal Resources and Safe Mining；2.School of Mining Engineering, China University of Mining & Technology

Online:2011-06-08 Published:2011-06-09

摘要/Abstract

摘要： 深部软岩巷道中大面积锚杆、锚索破断现象是巷道支护面临的一个难题。在不需要改进支护材料规格和材质的基础上研制了锚杆、锚索让压装置。分析了让压装置的作用原理，让压装置预留压缩量补偿围岩变形，避免了锚杆、锚索破断，同时实现高阻让压，阻止围岩变形。让压装置力学特性实验研究基于MTS815.02型岩石伺服渗透试验系统，实验采用给定变形的方式，按照位移控制模式以0.05 mm/s的速度加载，测试了3组让压装置的力学特性，实验结果表明，3组让压装置可分别配套于普通锚杆、φ17.8 mm锚索、φ18.9 mm锚索的使用。

关键词: 围岩变形, 让压装置, 高阻让压, 力学特性

Abstract: Many breakings in anchor bolts and cables in tunnel of deep soft rock were one of problems faced by roadway supporting. Based on the conditions without changing the specifications and material of supporting, the yield supporting device of anchor bolts and cables was invented. The functional principle of the yield supporting device was analyzed, that the reserved compression in yield supporting device can protect anchor bolts and cables from broken. At the same time, it could keep high resistance and yield supporting to constraint the surrounding rock deformation. The experimental research on the mechanical property of the yield supporting device was based on the MTS815.02 Rock Mechanics Test System, By using the method of given deformation, the experiment adopted the displacement-controlled modes with the speed of 0.05 mm/s to test the mechanical properties of three groups of the yield supporting device. The tests results indicated that these three groups of devices could respectively match with common anchor bolts, cables of φ17.8 mm and cables of φ18.9 mm for use.

Key words: Surrounding rock deformation, The yield supporting device, High resistance and yield supporting, Mechanical property

刘波涛, 高明仕, 闫高峰, 袁得江. 锚杆（索）让压装置作用原理及力学特性实验研究[J]. 金属矿山, 2011, 40(06): 127-129.

LIU Bo-Tao, GAO Ming-Shi, YAN Gao-Feng, YUAN De-Jiang. Experimental Research on Functional Principle of the Yielding Anchor BoltsCables) and its Mechanical Property[J]. Metal Mine, 2011, 40(06): 127-129.

[1]	董英健, 郭连军, 贾建军. 冲击加载作用下矿石试件的动态力学特性及块度分布特征[J]. 金属矿山, 2019, 48(08): 38-43.
[2]	杨晓杰, 张民, 王二雨. 柠条塔煤矿大采高工作面切顶沿空留巷围岩变形机理研究[J]. 金属矿山, 2018, 47(1): 172-177.
[3]	袁帅, 李艳军, 韩跃新, 刘杰. 还原温度对澳大利亚某赤铁矿石还原特性的影响[J]. 金属矿山, 2016, 45(07): 113-116.
[4]	秦忠诚, 王备备, 刘玉腾, 潘瑞凯. 高强预应力让压锚杆在复杂围岩中的应用[J]. 金属矿山, 2015, 44(11): 133-136.
[5]	梅群力, 钟太兴, 陈清运, 彭静波. 金鼎钨钼矿花岗闪长斑岩力学特性试验研究[J]. 金属矿山, 2015, 44(10): 51-55.
[6]	吕志, 朱建明, 胡宇, 王宇. 综掘巷道超前支护装置及其应用研究[J]. 金属矿山, 2015, 44(02): 45-48.
[7]	高宁, 朱宝训, 李建刚. 基于灰色模型群的软岩巷道围岩变形预测[J]. 金属矿山, 2015, 44(01): 94-97.
[8]	高宁, 潘传姣, 李建刚. 深埋隧道围岩变形预测的非线性组合模型[J]. 金属矿山, 2014, 43(08): 45-48.
[9]	陈顺满, 许梦国, 王明旭, 王平, 徐钊, 雒凯. 联井型巷道布置的三维数值模拟及掘进顺序优化[J]. 金属矿山, 2013, 42(08): 34-37+41.
[10]	张新国, 江宁, 张玉江, 江兴元, 张保良. 矸石膏体充填材料力学特性试验[J]. 金属矿山, 2012, 41(12): 127-131+135.
[11]	张默, 周玉新, 许传华, 曹作忠. 某铁尾矿土工织物复合体的真三轴数值试验[J]. 金属矿山, 2012, 41(11): 132-134.
[12]	刘长武, 周晓明, 李晓迪. 大采深煤矿地下巷道的工程特征[J]. 金属矿山, 2011, 40(06): 52-55.
[13]	陈忠平, 翟淑花, 高谦, 董璐. 泡沫砂浆充填体力学特性及其应用研究[J]. 金属矿山, 2010, 39(8): 7-10.
[14]	褚怀保, 余永强, 杨小林, 梁为民. 复合不耦合定向断裂爆破技术控制围岩变形应用研究[J]. 金属矿山, 2010, 39(6): 48-50.
[15]	甄红锋, 张继勋, 刘志远. 高地应力条件下围岩破损区岩体力学特性研究[J]. 金属矿山, 2008, 38(07): 15-18.