提高永平铜矿选铜回收率的试验研究

金属矿山 ›› 2011, Vol. 40 ›› Issue (08): 86-88+93.

提高永平铜矿选铜回收率的试验研究

袁源平¹，彭会清²

1.江西铜业集团公司永平铜矿；2.武汉理工大学资源与环境工程学院

出版日期:2011-08-09 发布日期:2011-08-11

Experimental Study on Improving Copper Recovery in Yongping Copper Mine

Yuan Yuanping¹，Peng Huiqing²

1.Yongping Copper Mine of Jiangxi Copper Group；2.Institute of Resource and Environment Engineering, Wuhan University of Technology

Online:2011-08-09 Published:2011-08-11

摘要/Abstract

摘要： 永平铜矿选矿厂采用中矿循序返回的铜硫混合浮选—铜硫分离浮选工艺流程，因中矿单体解离不充分而影响铜的回收。为此，采用中矿选择性分级再磨新工艺进行了旨在提高永平铜矿选铜回收率的实验室试验和工业试验。实验室试验结果表明，与原工艺相比，新工艺铜回收率可提高0.64个百分点，同时铜精矿品位可提高0.43个百分点；工业试验中新工艺铜回收率提高了0.89个百分点，铜精矿品位提高了0.38个百分点，证明了新工艺工业实施的可行性。

关键词: 中矿选择性分级再磨, 中矿循序返回, 选铜回收率

Abstract: The flow-sheet of copper-sulfide bulk flotation-copper-sulfide flotation separation and middlings returning in order in dressing plant of Yongping Copper Mine was carried out. The insufficient liberation of single mineral in middlings affects the recovery of copper. To this end, the laboratory tests and industrial tests were carried out to improve the recovery of copper in Yongping copper mine through the process of selective-classification regrinding of middlings. The lab tests indicated that compared with the original process, the new process increased copper recovery by 0.64%, and copper concentrate grade by 043%; In industrial tests, the copper recovery was increased by 0.89%, and copper grade improved by 0.38% by the new process. All these confirmed the feasibility of the new process in industrial implementation.

Key words: Selective classification regrinding of middlings, Middlings returning in order, Recovery rate of copper ore

袁源平, 彭会清. 提高永平铜矿选铜回收率的试验研究[J]. 金属矿山, 2011, 40(08): 86-88+93.

YUAN Yuan-Ping, PENG Hui-Qing. Experimental Study on Improving Copper Recovery in Yongping Copper Mine[J]. Metal Mine, 2011, 40(08): 86-88+93.

扫码分享