欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2012, Vol. 41 ›› Issue (08): 44-47+60.

• 采矿工程 • 上一篇    下一篇

深部煤炭充填开采地表变形控制研究

周杰彬1,2,刘长武1,2,李晓迪1,2,徐煜航1,2   

  1. 1.水力学与山区河流开发保护国家重点实验室;2.四川大学水利水电学院
  • 出版日期:2012-08-15 发布日期:2012-08-29
  • 基金资助:

    * 国家自然科学基金项目(编号:50879049,50574064),国家重点基础研究发展计划(973计划)项目(编号:2010CB226802)。

Research on Controlling Surface Subsidence to Deep Coal Mining With Filling

Zhou Jiebin1,2,Liu Changwu1,2,Li Xiaodi1,2,Xu Yuhang1,2   

  1. 1.State Key Laboratory of Hydraulics and Mountain River Engineering;2.School of Water Resource and Hydropower, Sichuan University
  • Online:2012-08-15 Published:2012-08-29

摘要: 结合传统长壁垮落法和充填开采法的优点,根据邢东矿1221工作面具体开采条件,提出利用极不充分开采原理与冒落带注浆结合来控制地表下沉,为建筑物下开采提供了理论和技术支持。同时,对该方法的采充顺序和减沉效果做了进一步分析,结果表明:该方法减沉效果明显,下沉率会小于0.2。

关键词: 充填开采, 冒落带注浆, 深部开采, 地表变形

Abstract: Combining with the advantages of the traditional long wall caving method and conventional filling technology method, according to the specific mining condition of 1221 mining face of Xingdong mine, super-subcritial extraction and cave backfill grouting combined is proposed to control the surface subsidence.It provides theory and technology support for mining under building.Meanwhile, the mining sequence and effect of reducing subsidence were analysis.Results show that effect of reducing subsidence is obvious by using this method, and the sink rate is smaller than 0.2.

Key words: Filling mining, Cave backfill grouting, Deep mining, Surface subsidence