欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2013, Vol. 42 ›› Issue (02): 22-26.

• 采矿工程 • 上一篇    下一篇

基于三维有限元的金山店铁矿深部回采顺序研究

 张小义1,2, 张红军1,2, 王文杰1,2   

  1. 1.武汉科技大学资源与环境工程学院;2.冶金矿产资源高效利用与造块湖北省重点实验室
  • 出版日期:2013-02-15 发布日期:2013-03-13

Research of Mining Sequence in Deep Mining at Jinshandian Iron Ore based on Three-dimensional

zhang Xiaoyi1,2, Zhang Hongjun1,2, Wang Wenjie1,2   

  1. 1.College of Resource and Environment Engineerin, Wuhan University of Science and Technology; 2.Key laboratory of Hubei Province of Efficient Utilization of Metallurgical Mineral Resources and Aggloeration
  • Online:2013-02-15 Published:2013-03-13

摘要: 为了解决武钢集团金山店铁矿深部开采面临的高地应力问题,在分析深部矿床赋存特点及矿岩物理力学性质的基础上,提出4种开采顺序方案,并运用三维弹塑性有限元软件对4种开采顺序方案进行数值模拟,分析各方案开采后水平分段应力分布状态以及安全系数,结果表明由上而下由东向西的回采顺序有利于实现深部矿体安全高效的回采。

关键词: 深部开采, 回采顺序, 应力分布, 安全系数, 有限元数值模拟

Abstract: In order to solve the high ground stress problem of deep mining faced by Jinshandian iron mine of Wusteel Group,and based on the analysis of occurrence characteristics of deep deposit and physical-mechanical properties of ores,4 kinds of mining sequence schemes were put forward,and the three-dimensional Elastoplastic FEM software was adopted to make numerical simulation on these four schemes.The sublevel stress distribution and safety factor for each scheme were analyzed,and the results showed that the downward and eastward mining sequence is conducive to realize the safe and highly efficient mining for deep ore body.

Key words: Deep mining, Mining sequence, Stress distribution, Safety factor, FEM simulation