欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2013, Vol. 42 ›› Issue (03): 29-31+35.

• 采矿工程 • 上一篇    下一篇

数值模拟在分层充填法采场参数选择中的应用

 杨家冕1,2,3, 刘人恩4, 王星1,2,3   

  1. 1.中钢集团马鞍山矿山研究院有限公司;2.金属矿山安全与健康国家重点实验室;3.金属矿产资源高效循环利用国家工程研究中心;4.中钢集团山东矿业有限公司
  • 出版日期:2013-03-15 发布日期:2013-04-16

Application of Numerical Simulation to Stope Parameters Selection of the Slicing and Backfilling Mining Method

yang Jiamian1,2,3, liu Ren'en4, Wang Xing1,2,3   

  1. 1.Sinosteel Maanshan Institute of Mining Research Co.,Ltd.;2.National Engineering Research Center of High Efficiency Cyclic Utilization of Metal Mineral Resources;3.Sinosteel Shandong Mining Co.,Ltd.;4.Sinosteel Shandong Mining Co.,Ltd.
  • Online:2013-03-15 Published:2013-04-16

摘要: 针对苍山铁矿缓倾斜难采矿体的现场实际,通过计算机数值模拟的方式,选取适合苍山铁矿安全、经济、合理的采场参数。

关键词: 采场参数, 数值模拟, 缓倾斜, 分层充填

Abstract: The secure,economic and reasonable stope parameters are selected through computer numerical simulation aiming at the on-site practice of gently inclined hard-to-mine ore-body in Cangshan Iron Mine.

Key words: Stope parameter, Numerical simulation, Gentle dip,Slicing and filling