欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2013, Vol. 42 ›› Issue (06): 87-89.

• 地质与测量 • 上一篇    下一篇

高密度电法在矿山地质灾害勘察中的应用

李彬1,庹先国2,3,张赓1,汪楷洋1   

  1. 1.地球探测与信息技术教育部重点实验室;2.地质灾害防治与地质环境保护国家重点实验室;3.西南科技大学国防科技学院
  • 出版日期:2013-06-17 发布日期:2013-08-09
  • 基金资助:

    * 地质灾害防治国家重点实验室基金项目(编号:SKLGP2010Z002)。

Application of High Density Resistivity Method to the Survey of Geologic Disasters in Mine

Li Bin1,Tuo Xianguo2,3,Zhang Geng1,Wang Kaiyang1   

  1. 1.Key Laboratory of Earth Exploration & Information Technology of Ministry of Education; 2.State Key Laboratory of Geo-hazard Prevention and Geo-environment Protection;3.School of National Defense Science And Technology,The Southwest University of Science and Technology
  • Online:2013-06-17 Published:2013-08-09

摘要: 以工程勘察中应用广泛的高密度电法为基础,采用一种特殊的接地辅助装置克服了该方法在矿区基岩裸露地面的接地障碍,并将其应用于某矿区内已知断层和地下采空区的探测任务中。资料解译成果表明,高密度电法在此类勘察任务中具有较高的可行性和有效性。

关键词: 高密度电法, 矿山地质灾害, 接地装置, 断层, 采空区

Abstract: Based on the high density resistivity method which is widely used in engineering survey,this paper used a special auxiliary grounding device to solve the ground obstacles of this method in the bedrock exposed area of the mine,and then this device has been applied to detect a known fault and an underground mined-out area in mining area.The interpretation results from the data show that high density resistivity method is feasible and efficient in finishing this type of survey.

Key words: High density resistivity method, Geologic disasters in mine, Grounding device, Fault, Mined-out area