基于组态软件的磨机供料自动监控系统

金属矿山 ›› 2013, Vol. 42 ›› Issue (10): 116-119+123.

基于组态软件的磨机供料自动监控系统

于仲安¹，张姿²

1.江西理工大学电气工程与自动化学院；2.陕西红太阳教育管理有限公司

出版日期:2013-10-15 发布日期:2014-01-02

Automatic Monitoring System for Feeding of Mill Based on Configuration Software

Yu Zhong'an¹，Zhang Zi²

1.College of Electrical Engineering and Automation，Jiangxi University of Science and Technology；2.Red Sun Education Co., Ltd. in Shanxi Province

Online:2013-10-15 Published:2014-01-02

摘要/Abstract

摘要： 通过组态软件与PLC相结合的方式，建立了某选矿厂磨机供料系统的自动监控系统。在采用的MCGS组态界面中，为布料皮带机提供了顺序下料、料位优先下料和模糊控制下料3种下料方式，便于系统根据实际需要进行选择。同时，为了保证整个选矿生产的连贯性，对磨机供料系统中矿仓出料口的出料量进行变频控制，达到恒定给矿的目的，使球磨环节能够正常运行。用户可以在组态软件中通过实时曲线、历史曲线以及报警等功能实现远程监控。

关键词: MCGS组态软件, 磨机供料, 自动监控

Abstract: With combination of PLC and configuration software, a set of automatic monitoring system for feeding of mill in a dressing plant was established. During the process of adopting the MCGS configuration interface, three kinds of blanking means for fabric belt were proposed for making right choice according to the actual need, including sequential blanking, optimal blanking at fixed level and fuzzy control blanking. Meanwhile, in order to reflect the continuity of the mineral processing production, the discharge from ore bin in mill feed system was arranged in frequency control to achieve the purpose of the constant feeding and to make the ball mill run normally. As well, remote monitoring can be realized by the functions of real-time curve, historical curve and alarm reporting of configuration software.

Key words: MCGS Configuration software, Feeding of mill, Automatic monitoring

于仲安, 张姿. 基于组态软件的磨机供料自动监控系统[J]. 金属矿山, 2013, 42(10): 116-119+123.

YU Zhong-An, ZHANG Zi. Automatic Monitoring System for Feeding of Mill Based on Configuration Software[J]. Metal Mine, 2013, 42(10): 116-119+123.

扫码分享