欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2026, Vol. 55 ›› Issue (10): 132-143.

• • 上一篇    下一篇

温度—纤维协同影响下充填体动态强度与损伤特性研究

苏 旭1 ,刘艳章1,2 ,秦绍兵3   

  1. 1.武汉科技大学资源与环境工程学院,湖北 武汉 430081; 2.冶金矿产资源高效利用与造块湖北省重点实验室, 湖北 武汉 430081; 3.中钢集团武汉安全环保研究院有限公司,湖北 武汉 430081
  • 出版日期:2026-11-03 发布日期:2026-11-09
  • 通讯作者: 刘艳章(1969—),男,教授,博士,博士研究生导师。
  • 作者简介:苏 旭(2000—),男,硕士研究生。
  • 基金资助:
    国家自然科学基金面上项目(编号:42377191)。

Study on Dynamic Strength and Damage Characteristics of Backfill under the Synergistic Effect of Temperature and Fiber

SU Xu1 ,LIU Yanzhang1,2 ,QIN Shaobing3   

  1. 1.School of Resources and Environmental Engineering,Wuhan University of Science and Technology,Wuhan 430081,China; 2.Hubei Provincial Key Laboratory of Efficient Utilization and Briquetting of Metallurgical Mineral Resources,Wuhan 430081,China; 3.Sinosteel Wuhan Institute of Safety and Environmental Protection Co.,Ltd.,Wuhan 430081,China
  • Online:2026-11-03 Published:2026-11-09

摘要: 为探究复杂热—力耦合环境下纤维增强尾砂胶结充填体的动力学响应及其微观增强机制,采用分离式 霍普金森压杆(SHPB)试验系统,开展了不同纤维类型(聚丙烯纤维PPF、玻璃纤维GF)、掺量(0%~0.5%)及养护温 度(25~50 ℃)影响下的动态冲击试验;结合低场核磁共振(NMR)与扫描电镜(SEM)技术,从孔隙演化及界面形貌角 度揭示其宏微观关联演化规律。研究表明,纤维尾砂胶结充填体动态抗压强度具有明显的应力增强效应,随纤维掺 量与养护温度的增加均呈先增后减的非线性变化趋势。在本研究条件下(灰砂比1∶6、冲击速度4.8±0.2 m/s),2种 纤维均在纤维掺量0.3%、养护温度45 ℃时达到峰值。PPF在提升纤维尾砂胶结充填体(FRCTB)韧性及温度适应性 方面优于GF,中高温环境下其动态增强因子多维持在2.0~3.0,峰值可达3.0以上。宏观破坏块度更为饱满。NMR 分析证实,45 ℃下的中温环境通过促进水化反应使基体孔隙向微细化演变,总孔隙率的降低为纤维提供了最优锚固 平台。SEM观察发现,PPF通过表面滑移与韧性撕裂显著提升了冲击能量耗散效率。研究成果揭示了基体强化与纤 维阻裂的耦合机制,可为深部矿山复杂环境下的充填体优化设计与工程应用提供理论依据。

关键词: SHPB , 纤维尾砂胶结充填体 , NMR , SEM , 养护温度

Abstract: To investigate the dynamic response and micro-enhancement mechanism of fiber-reinforced tailings cemented fill under complex thermo-mechanical coupling conditions,dynamic impact tests were conducted using a split Hopkinson pres sure bar (SHPB) experimental system under the influence of different fiber types (polypropylene fiber (PPF) and glass fiber (GF)),fiber contents (0%-0.5%),and curing temperatures (25-50 ℃).Combined with low-field nuclear magnetic reso nance (NMR) and scanning electron microscopy (SEM) techniques,the macro-micro correlation evolution laws were revealed from the perspectives of pore evolution and interfacial morphology.The study showed that the dynamic compressive strength of FRCTB exhibited a significant stress enhancement effect,exhibiting a nonlinear trend of first increasing and then decreasing with the increase of fiber content and curing temperature.Under the conditions of this study (cement-to-sand ratio of 1∶6,im pact velocity of 4.8±0.2 m/s),both fibers reached their peak values at a fiber content of 0.3% and a curing temperature of 45 ℃.PPF was superior to GF in terms of enhancing the toughness and temperature adaptability of FRCTB. Its dynamic impact factor remained mostly between 2.0-3.0 in medium-high temperature environments,with peak values exceeding 3.0.The mac roscopic failure block size was more full.NMR analysis confirmed that the medium temperature environment at 45 ℃ promoted the evolution of matrix pores towards micronization through hydration reactions,and the reduction in total porosity provided an optimal anchoring platform for fibers.SEM observations revealed that PPF significantly improved the impact energy dissipation efficiency through surface sliding and toughness tearing. The research results revealed the coupling mechanism of matrix strengthening and fiber crack resistance,providing a theoretical basis for the optimal design and engineering application of fill ings in complex environments of deep mines.

Key words: SHPB,fiber tailings cemented backfill,NMR,SEM,maintenance temperature

中图分类号: