欢迎访问《金属矿山》杂志官方网站,今天是 分享到:
×

扫码分享

金属矿山 ›› 2010, Vol. 39 ›› Issue (05): 128-130+147.

• 地质与测量 • 上一篇    下一篇

基于ANSYS的球磨机回转体模态分析

 韩燕, 门清毅   

  1. 洛阳理工学院
  • 出版日期:2010-05-15 发布日期:2010-11-09
  • 基金资助:

    河南省教育厅科技攻关项目(编号:2008B460011),2007年洛阳理工学院青年基金项目(编号:2007J01)。

Modal Analysis of Rotator of Ball Mill Based on ANSYS

Han Yan,Men Qingyi   

  1. Luoyang Institute of Science and Technology
  • Online:2010-05-15 Published:2010-11-09

摘要: Φ3.8 m×13 m双滑履球磨机为研究对象,利用有限元分析软件ANSYS对其回转体进行模态分析,得到了磨机回转体的前10阶固有频率和振型,并由此确定了回转体易发生疲劳破坏的部位,最后通过结构改进使其动态性能得到了改善。

关键词: 球磨机, 模态分析, 固有频率, 振型

Abstract: Using ANSYS to analyze the modality of the Φ3.8 m×13 m ball mill's rotator,got the former ten modal natural frequencies and vibration modes.Through the modal analysis,found the position which may be easily destroyed.Then made the structure improvement,and the dynamic performance of rotator has been improved.

Key words:  Ball mill, Modal analysis, Natural frequency, Vibration mode