Welcome to Metal Mine! Today is Share:
×

扫码分享

Metal Mine ›› 2014, Vol. 43 ›› Issue (03): 52-55.

Previous Articles     Next Articles

Analysis on Different Frequency-band Energy of Blasting Vibration Signal based on Wavelet Transform

Wang Tao1,Xia Anxiong2,Liao Xinxu1   

  1. 1.Guangdong Hongda Blasting Co.,Ltd.,Guangzhou 510623,China;2.School of Resources and Environmental Engineering,Wuhan University of Technology,Wuhan 430070,China
  • Online:2014-03-15 Published:2014-04-28

Abstract: In view of non-stationary characteristics of short-time blasting vibration and quick abrupt change and the signal spread in three directions,and combining with the measured data of hole-by hole blasting in an open pit mine,the energy distribution of vibration signal in axial,radial,vertical direction at a certain point was analyzed by adopting the wavelet analysis method.The results showed that maximum frequency-band energy and peak particle velocity were basically in the same position with a proportional relationship,but sometimes some individual maximum frequency band energy was different.Three-directional vibration signals of hole-by-hole blasting were differently distributed into different frequency bands.The energy at each direction mainly concentrates within 250 Hz,and will disappear beyond 250 Hz; The blasting resonance less impacted on buildings,because the building's natural frequency at surrounding is lower and the vibrating energy at 140 m away from explosion source mainly concentrates in 15 Hz or more.The result provides a new approach for safety evaluation under blasting vibration conditions.

Key words: Hole-by-hole blasting, Vibration monitoring, Vibration signal, Wavelet transform, Energy distribution